Search results for '3690 end cap'
-
3692 First Choice Series 3690 CVR Panic Exit Device - Standard & Electric Latch Retraction
$240.00First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**
DOWNLOADS
3692 Product Literature
3692 Product Manual / Installation
3600 Series Product Template**Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**
PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
Learn More
- 48" BlackStandard/Manual Device
- 48" MEL Devices - All Finishes -
First Choice NL Night Latch Kit for 3690 CVR Panic
$24.00Night Latch Kit for 3690 CVR Panic's
Kit Includes:
#8 - 16001004 - Cylinder Bushing
#9 - 16001007 - Pinion
#10 - 16001003 - Retractor
#11 - 3 - Axle Screw
#13 - 821- Pinion Support BracketDOWNLOADS
Learn More
3692 Product Manual -
Xcluder Pest Control Door Sweep
$60.00 As low as: $45.00Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size doorCut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installationCurrent discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze Anodized
- 5 @ 48" Dk. Bronze AnodizedDOWNLOADS
Learn More
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions -
Sneeze Guard / Safety Divider / Partition Posts - Surface Mounted
$50.00These protective posts are designed to create a defensive barrier that allows for interactions while easing the concerns of your employees and customers.
The ideal solution to protect your staff and customers from the rapid spread of airborne bacterial germs and viruses caused by sneezing and coughing.
Used to separate restaurant booths, counters, office desks, banks, retail store cashier sections, or just about anywhere you can think of.
Diameter: 1" dia. tube.
Finish: Brushed (satin) stainless steel - US32D
Height: 30" tall - Can be recut to any length. (Remove bottom mounting foot and cut with pipe cutter, then reattach foot)
Adjustable clamps accept 1/4" or 3/8" Glass, Plexi, Lexan. (Note: Glass, Plexi, Lexan is not included)
Glazing Secured by nylon-tipped set screws.
Claps are adjustable to any angle!
Glass recommendation: We recommend setting your vertical posts in place prior to ordering from your local glass company. This will ensure proper sizing and fit. The glass can extend past the top of the vertical tube to make it taller than 30”. You can also hold the glass up 5” for example or have the glass cut to have a “pass-through” at the bottom. We recommend you get the glass with polished edges. Please consult a glass company for recommended maximum spans depending on glazing selected.Note: fasteners NOT included due to varting surface mounting conditions.
If you need a WALL MOUNTED bracket for these vertical posts please click HERE
Learn More -
First Choice SW300-2CA Signal Switch
$175.00The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More -
Dormakaba RCI 0161 Electric Strike
$190.00RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D OnlyThe stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.
FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0161 Cut Sheet
0161 Installation Manual -
Dormakaba RCI 0162 Electric Strike
$310.00RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.NOTE: Available in US32D Only
FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0162 Cut Sheet
0162 Installation Manual -
BEA 4.5" square Stainless steel push plate
$60.00BEA 10PBS451 Stainless steel push plate, 4.5" square, blue handicap logo and textDOWNLOADS
Cut Sheet Learn More -
BEA 1.5" Jamb Stainless steel push plate
$56.00BEA / BEA Activation Plates Sensors, Switches, Relays, Timers / Door Actuators & Plates BEA 10PBJ1 Stainless steel push plate, 1.5" by 4.75", in jamb plate, blue handicap logo and textDOWNLOADS
Cut Sheet Learn More -
Ives CS115 Crash Stop / Storm Chain
$35.0025 1/2" Length - Used for 36" Door Width (other sizes available for factory order) - Specially designed for full-size exterior doors - Tear resistant, grey vinyl cover - Heavy duty compression spring assembled to both ends of chain and end brackets - Packed with sheet metal screw. - Cast brass brackets with solid, welded steel chain - 25 1⁄2" - Recommended for 36" door width (product no. CS115-25) Finishes: - 613 Oil Rubbed Bronze Brass 10B - 626 Satin Chrome Brass 26DDOWNLOADS
Learn More
Cut Sheet
Installation Template