Search results for 'dorma RTS 88'
-
SL11HD Full Mortised Continuous Hinge
$140.00The SL11HD Concealed / Mortsied Continuous Hinge.
The HEAVY DUTY Manufacturing and the Lifetime Warranty give you the safety and PEACE OF MIND that you deserve.
For door thickness 1 3/4".
NOTE: For Continuous Hinges 95" and over in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. 120" hinges long must be shipped LTL freight - Please call for updated accurate shipping quotes.DOWNLOADS
Learn More
Data Sheet -
Power Supplies for Command Access MLRK1-FAL17 MEL Kit
$140.00Command Access PS202 Power Supply. This Will Power TWO (2) MLRK1 MEL Kit.
PS202 - 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.
DOWNLOADS
Learn More
PS202 Cut Sheet
PS202 Installation Manual -
Dormakaba RCI 0162 Electric Strike
$310.00RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.NOTE: Available in US32D Only
FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0162 Cut Sheet
0162 Installation Manual -
Dormakaba RCI 0161 Electric Strike
$190.00RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D OnlyThe stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.
FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited WarrantyDOWNLOADS
Learn More
0161 Cut Sheet
0161 Installation Manual -
SDC BR64XL Rectifier
$20.00Used with the SDC 45 Series electric Strikes.
The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.
Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load
Learn More -
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
First Choice Strike Kit for 3790 RIM Panic
$40.00Strike Kit for 3790 RIM Panic
Kit Includes:
#14 - 836 - Strike Mounting Screws (4)
#15 - 17001423- Strike Shim
#16 - 17001A05- Strike Assembly
#17 - 17001288- UHMD Wear Strip
Mounting TemplateDOWNLOADS
Learn More
3792 Product Manual -
Dorma RTS 88 Overhead Concealed Closer - REPLACEMENT BODIES ONLY AND 11/16" SPINDLE
$215.00REPLACEMENT BODIES ONLY
NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGEAroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.
The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.
Size 2 = Up to a 2'-6" Exterior Door or 3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI = Interior Door 5lb max opening force for ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for ADA - Available in 105 degrees only.
DOWNLOADS
Product Manual* Closer Sizes 2, 4, BFI, BFE have at least one week lead time from the factory.
Learn More
* All 1/2" Spindle models have at least one week lead time from the factory. -
Dorma BTS 80 Floor Concealed Closer - REPLACEMENT BODIES ONLY
$550.00REPLACEMENT BODIES ONLY
DOWNLOADS
Product Brochure
All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only
Learn More
Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door -
Drop Angle Bracket For "Standard" Closers
$15.00This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.
1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.
Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.
Available in both Clear and Dark Bronze Anodized finishes.
DOWNLOADS
Diagram TemplateExample Closers To Fit This Bracket:
- Norton 1600 Series
- Dormakaba/Stanley QDC300 Series
- LCN 1250 Series
- Falcon SC61
- Hager 5300
- International 8051-TP