Phone: (781) 421-3107  -   Fax: (781) 421-3108
Loading...

Search results for 'elect'

Items 1 to 10 of 29 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Ascending Direction
  1. 3692 ( " First Choice " Series 3690 CVR Panic Exit Device

    3692 First Choice Series 3690 CVR Panic Exit Device - Standard & Electric Latch Retraction

    $240.00

    First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
    Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
    With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
    The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
    The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.

    **Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

    DOWNLOADS
    3692 Product Literature
    3692 Product Manual / Installation

    3600 Series Product Template

    **Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

    PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
    - 48" BlackStandard/Manual Device
    - 48"  MEL Devices - All Finishes

    Free Ground Ship

    Learn More
  2. Aroyan Straight Pull

    1 1/4" Custom Straight Ladder Pulls ARM3301

    $90.00

    ARM3301 - 1 1/4” diameter with custom center to center straight pull handle.
    Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
    All glass doors come with a decorative thru-bolt for single pull applications

    Available in black aluminum or US32D-316 satin stainless (high grade stainless)
    Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.

    Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer Pulls when not seen.

    The recommended minimum length is 18" overall.
    The maximum length is 118" overall.

    "Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.

    Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
    Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.

    Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
    Available in single pull mount or Back to Back mounting (BTB)

    BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.

    SPECIFICATIONS
    Material Dia: 1 1/4"
    CTC: Custom please specify
    Base: 1"
    Projection: 3 1/2"
    Clearance: 2 1/4"

    NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over  104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.

    DOWNLOADS
    ARM3301 Cut Sheet

    Learn More
  3. 5740K3 Kit Alum

    Norton 5740K3 - Norton 5700 Series Automatic Door Opener

    $2,050.00

    The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability.

    Universal Non-Handed, Push & Pull Mounting, Includes Wireless Push Buttons & 18" Power Cord to Plug Directly Into a120v Outlet

    Note: The operator is shipped as a PUSH unit and includes instructions to convert to pull in the field.

    Norton 5740K3 Complete Kit Includes:
    5700 Operator
    Cover
    7701-1A Push Arm Assembly
    5710-1 Pull Arm Assembly
    (2) ADA1019-1 Push Buttons
    (2) 548 Transmitters
    539 Reciever 5700PC
    18" Power cord

    DOWNLOADS
    Installation and Operating Instructions Using Power Cord- Push & Pull Mount
    Installation and Operating Instructions Hardwire- Push & Pull Mount
    Push To Pull Conversion Instructions
    Wiring Instructions
    Catalog/Brochure
    Warranty

    Looking for the Touchless Norton 700 Actuators

    Free Ground Ship


    Learn More
  4. 3 Panel

    Sneeze Guard / Safety Divider / Partition Posts - Surface Mounted

    $50.00

    These protective posts are designed to create a defensive barrier that allows for interactions while easing the concerns of your employees and customers.
    The ideal solution to protect your staff and customers from the rapid spread of airborne bacterial germs and viruses caused by sneezing and coughing.
    Used to separate restaurant booths, counters, office desks, banks, retail store cashier sections, or just about anywhere you can think of.

    Diameter: 1" dia. tube.
    Finish: Brushed (satin) stainless steel - US32D
    Height: 30" tall - Can be recut to any length. (Remove bottom mounting foot and cut with pipe cutter, then reattach foot)  
    Adjustable clamps accept 1/4" or 3/8" Glass, Plexi, Lexan. (Note: Glass, Plexi, Lexan is not included)
    Glazing Secured by nylon-tipped set screws.
    Claps are adjustable to any angle!

    Glass recommendation: We recommend setting your vertical posts in place prior to ordering from your local glass company. This will ensure proper sizing and fit.  The glass can extend past the top of the vertical tube to make it taller than 30”. You can also hold the glass up 5” for example or have the glass cut to have a “pass-through”  at the bottom. We recommend you get the glass with polished edges. Please consult a glass company for recommended maximum spans depending on glazing selected.

    Note: fasteners NOT included due to varting surface mounting conditions.

    If you need a WALL MOUNTED bracket for these vertical posts please click HERE

    Learn More
  5. SW300-2CA

    First Choice SW300-2CA Signal Switch

    $175.00

    The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
    Installation Manual Learn More
  6. SDC 45-4RV

    SDC 45 Series Electric Strikes

    $115.00

    SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.

    Designed with round corners for aluminum jambs.
    12/24 VDC (+/- 10%) input.  (Please ADD the "BR64XL" - Rectifier If you have AC input)

    Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, &  Keeper Deadlocked Status.

    Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)

    When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.

    Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.

    BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.


    DOWNLOADS
    Data Sheet

    Learn More
  7. SDC BR64XL Rectifier

    SDC BR64XL Rectifier

    $20.00

    Used with the SDC 45 Series electric Strikes.

    The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

    Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

    Learn More
  8. SDC RMB buzzer

    SDC RMB Buzzer

    $35.00

    Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.

    Learn More
  9. 0161

    Dormakaba RCI 0161 Electric Strike

    $190.00

    RCI 0161 3/4" Semi-Mortise Rim Strike
    The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.

    "08" Is 24 VAC/DC
    "05" is 12 VAC/DC
    NOTE: Available in US32D Only

    The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.

    FEATURES
    Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
    Strength: 1,500lbf Static 70ft-lb Dynamic
    Endurance: 500,000 Cycles
    Mode: Fail-Secure
    Warranty: 5 Year Limited Warranty

    DOWNLOADS
    0161 Cut Sheet
    0161 Installation Manual

    Learn More
  10. 0162

    Dormakaba RCI 0162 Electric Strike

    $310.00

    RCI 0162 3/4" Rim Strike
    The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

    NOTE: Available in US32D Only

    FEATURES
    Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
    Strength: 1,500lbf Static 70ft-lb Dynamic
    Endurance: 250,000 Cycles
    Mode: Fail-Secure
    Latch Monitor: Optional Latch Monitor Model Available
    Fire-Rated: Optional 3-Hour Model Available
    Warranty: 5 Year Limited Warranty

    DOWNLOADS
    0162 Cut Sheet
    0162 Installation Manual

    Learn More

Items 1 to 10 of 29 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Ascending Direction

      Copyright 2020,  Aroyan Inc, 1423 Bedford Street, Unit 1, Abington, MA 02351         info@aroyaninc.com

Mobile Site | Back to Top