Phone: (781) 421-3107  -   Fax: (781) 421-3108
Loading...

Search results for 'first choice 3792'

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Ascending Direction
  1. 3692 ( " First Choice " Series 3690 CVR Panic Exit Device

    3692 First Choice Series 3690 CVR Panic Exit Device - Standard & Electric Latch Retraction

    $240.00

    First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
    Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
    With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
    The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
    The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.

    **Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

    DOWNLOADS
    3692 Product Literature
    3692 Product Manual / Installation

    3600 Series Product Template

    **Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

    PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
    - 48" BlackStandard/Manual Device
    - 48"  MEL Devices - All Finishes

    Free Ground Ship

    Learn More
  2. MLRK1-FAL17

    Motorized Latch Retraction Kit for First Choice 3600/3700 Series Exit Device MEL / QEL

    $350.00

    The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
    UL Listed + 3 Year Warranty

    The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
    Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
    custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
    It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
    breeze.

    FEATURES
    Voltage range – 24VDC +/- 10%
    System protection – unit shutdown when
    voltage exceeds 28VDC
    Standard - Average Current Peak: 900mA,
    Average Current Hold: 200mA
    PTS adjustment – approx. 1/4”

    **Don't Forget About A Power Supply With Electric Latch Retraction**

    DOWNLOADS
    MLRK1 Cut Sheet
    MLRK1 Installation Manual

    Learn More
  3. SW300-2CA

    First Choice SW300-2CA Signal Switch

    $175.00

    The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
    Installation Manual Learn More
  4. Strike kit 1

    First Choice Strike Kit for 3790 RIM Panic

    $40.00

    Strike Kit for 3790 RIM Panic
    Kit Includes:
    #14 - 836 - Strike Mounting Screws (4)
    #15 - 17001423- Strike Shim
    #16 - 17001A05- Strike Assembly
    #17 - 17001288- UHMD Wear Strip
    Mounting Template

    DOWNLOADS
    3792 Product Manual

    Learn More
  5. NL Kit 1

    First Choice NL Night Latch Kit for 3690 CVR Panic

    $24.00

    Night Latch Kit for 3690 CVR Panic's
    Kit Includes:
    #8 - 16001004 - Cylinder Bushing
    #9 - 16001007 - Pinion
    #10 - 16001003 - Retractor
    #11 - 3 - Axle Screw
    #13 - 821- Pinion Support Bracket

    DOWNLOADS
    3692 Product Manual

    Learn More
  6. 5740K3 Kit Alum

    Norton 5740K3 - Norton 5700 Series Automatic Door Opener

    $2,050.00

    The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability.

    Universal Non-Handed, Push & Pull Mounting, Includes Wireless Push Buttons & 18" Power Cord to Plug Directly Into a120v Outlet

    Note: The operator is shipped as a PUSH unit and includes instructions to convert to pull in the field.

    Norton 5740K3 Complete Kit Includes:
    5700 Operator
    Cover
    7701-1A Push Arm Assembly
    5710-1 Pull Arm Assembly
    (2) ADA1019-1 Push Buttons
    (2) 548 Transmitters
    539 Reciever 5700PC
    18" Power cord

    DOWNLOADS
    Installation and Operating Instructions Using Power Cord- Push & Pull Mount
    Installation and Operating Instructions Hardwire- Push & Pull Mount
    Push To Pull Conversion Instructions
    Wiring Instructions
    Catalog/Brochure
    Warranty

    Looking for the Touchless Norton 700 Actuators

    Free Ground Ship


    Learn More
  7. Surface Mount Power Loop Transfer Box

    Surface Mount Power Loop Transfer Box

    $25.00

    Surface Mounted Power Transfer Loop with Aluminum Wire Termination Box

    DOWNLOADS
    Clear = SDC PT-3 Data Sheet
    Dark Bronze = First Choice EMT-300-BR

    Learn More
  8. First choice L3 Lever Trim

    First Choice L3 Lever Trim for 3690/3790 Manual Series Exit Devices

    $415.00

    All L3 Levers are Factory Ordered, 3-5 weeks lead time.

    Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
    All levers are designed to work with most common mortise cylinders.
    A security collar is included.
    Available in powder coat finishes matching clear aluminum or dark bronze.

    DOWNLOADS
    Product Literature
    Product Literature
    Product Templates

    Cylinder Cam Information

    "M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
    "M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
    "M2" Passage = The lever is always operable and cannot be locked against entry.
    "M0" Inactive = The lever acts as a pull only and is inoperable.
    "E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)

    All L3 Levers are Factory Ordered, 3-5 weeks lead time.

    Learn More
  9. Power Supply

    Power Supplies for First Choice MEL & EL Panic Devies

    $150.00

    Not Sure Which Power Supply you need?: Power Supply Selector

    1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
    • In addition, an auxiliary power output shall provide power for accessory devices such as card
    readers, key-pads, REX PIRs, electronic timers, relays, etc.
    Single MEL Submittal
    Single MEL Install Manual

    1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
    • Each lock output shall have an adjustable relock delay timer
    • It shall control a pair of doors simultaneously or independently two doors
    • Relay for each output to trigger external relays, ADA push plate switches, etc.
    • Delayed follower relays shall control automatic door operators for doors that are always locked
    or for doors that are unlocked during the business day
    • Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
    • A programmable FACP interface shall provide power/remove power to the lock outputs when activated
    • Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
    • Intelligent logic shall provide protection against accidental shorting of lock outputs.
    Dual MEL Submittal
    Dual MEL Install Manual

    16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
    • It is designed to handle the high current surge panic hardware locking devices demand.
    • In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
    Single EL Submittal
    Single EL Install Manual

    16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
    • It is designed to handle the high current surge panic hardware locking devices demand
    • Each lock output has an adjustable relock delay timer
    • It will control a pair of doors simultaneously or independently control two individual doors
    • It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
    • Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
    • In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
    • A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
    • LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
    • Intelligent logic provides protection against accidental shorting of lock outputs.
    Dual EL Submittal
    Dual EL Install Manual

    Free Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)

    Learn More
  10. 3792 ( " First Choice ” Series 3790 Rim Panic Exit Device

    3792 First Choice Series 3790 Rim Panic Exit Device - Standard & Electric Latch Retraction

    $240.00

    First Choice Series 3792 Rim Panic Exit Device, With Cylinder Prep, Less Key Cylinder
    Packaging powerful security into a compact size, the 3792 can be mounted on doors with stiles as narrow as 2” and includes a 1” forged steel latch bolt.
    Non-handed and available for doors up to 4 feet, the 3792 is a convenient solution for demanding, busy traffic conditions.
    These durable devices are ANSI Grade I (500,000 cycles) and UL Listed.
    Striking anodized finishes are accented with high-performance coatings on solid metal end clips.
    The 3792, EL3792, MEL3792 can retrofit the old Dor-0-Matic crash bar (part # 2090) and it also can replace the Dor-0-Matic 1790.

    **Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

    DOWNLOADS
    3792 Product Literature
    3792 Product Manual / Installation
    3700 Series Product Template

    **Aroyan Can Not Warranty an EL/MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

     PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
    - 48" BlackStandard/Manual Device
    - 48"  MEL Devices - All Finishes
    -
    ALL Solenoid EL Devices are being DISCONTINUED! - If you need a Solenoid EL device we have very limited in stock, please call to verify. Once they are gone, they are gone.

    Current discontinued 16 amp EL Inventory Includes:
    - 3 @ EL3792-36" Clear Anodized
    - 4 @ EL3792-36" Dk. Bronze Anodized
    - 4 @ EL3792-42" Clear Anodized

    - 2 @ EL3792-42" Dk. Bronze Anodized

    Free Ground Ship

    Learn More

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Ascending Direction

      Copyright 2020,  Aroyan Inc, 1423 Bedford Street, Unit 1, Abington, MA 02351         info@aroyaninc.com

Mobile Site | Back to Top