You have no items in your shopping cart.
REPLACEMENT BODIES ONLY
All floor-concealed door closers shall be DORMA BTS80 Series
employing a cam and roller mechanism. The closers shall be
capable of controlling interior or exterior doors weighing up to
660 pounds and measuring up to 4'-0" wide exterior and 4'-6"
interior. The closers will have selectable multipoint hold open
between approximately 75º and 175º. The closers will have
selectable delayed action to allow delayed closing from 175º to
75º. The closers will have mechanical backcheck at
approximately 70º. Dual valve adjustment will provide
controlled closing speed from approximately 175º opening
range, even in cold temperature conditions. The closer will
provide adjustment within the cement case to allow lateral and
longitudinal adjustment of 1/4" and vertical height adjustment
of 5/32". Field interchangeable spindles will be available to
provide bottom door clearances ranging from 5/16" to 2-5/16".
Available in Ansi 3 (Barrier Free), Ansi 4, and Ansi 6 - bodies only
Ansi 3 (Barrier Free) = Up to a 3'-0" Exterior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door
Technical Data
• Compact closer body and cement case 2-3/8" deep suited for
thin slab concrete construction.
• Accommodates doors weighing up to 660 pounds and 4'-6"
wide interior and 4'-0" exterior.
• Closer adjustment in cement case provides lateral and
longitudinal adjustment of 1/4" and height adjustment of 5/32".
• A pressure relief valve protects closer from damage caused
by forced closing.
• Optional sealing compound SC-1 prevents water or cleaning
solvent from entering the cement case.
• If door hardware or adjacent structures interfere with
maximum opening, an auxiliary stop should be installed.
• Closer body is non-handed.
• Mechanical backcheck at approximately 70º.
• Selectable delayed action between 175º and 75º. Extends
the closing cycle to allow unobstructed passage.
• Delayed action is functional when hold open is not engaged.
• Dual thermostatic control valves combined with special
hydraulic fluid provide controlled closing from 175º.
• Selectable multipoint hold open between approximately 75º
and 175º.
• Adjustment for start of hold open range or when delayed
action releases. Adjustable between 75º and 105º.
All floor-concealed door closers shall be DORMA BTS80 Series
employing a cam and roller mechanism. The closers shall be
capable of controlling interior or exterior doors weighing up to
660 pounds and measuring up to 4'-0" wide exterior and 4'-6"
interior. The closers will have selectable multipoint hold open
between approximately 75º and 175º. The closers will have
selectable delayed action to allow delayed closing from 175º to
75º. The closers will have mechanical backcheck at
approximately 70º. Dual valve adjustment will provide
controlled closing speed from approximately 175º opening
range, even in cold temperature conditions. The closer will
provide adjustment within the cement case to allow lateral and
longitudinal adjustment of 1/4" and vertical height adjustment
of 5/32". Field interchangeable spindles will be available to
provide bottom door clearances ranging from 5/16" to 2-5/16".
Available in Ansi 3 (Barrier Free), Ansi 4, and Ansi 6 - bodies only
Ansi 3 (Barrier Free) = Up to a 3'-0" Exterior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door
Technical Data
• Compact closer body and cement case 2-3/8" deep suited for
thin slab concrete construction.
• Accommodates doors weighing up to 660 pounds and 4'-6"
wide interior and 4'-0" exterior.
• Closer adjustment in cement case provides lateral and
longitudinal adjustment of 1/4" and height adjustment of 5/32".
• A pressure relief valve protects closer from damage caused
by forced closing.
• Optional sealing compound SC-1 prevents water or cleaning
solvent from entering the cement case.
• If door hardware or adjacent structures interfere with
maximum opening, an auxiliary stop should be installed.
• Closer body is non-handed.
• Mechanical backcheck at approximately 70º.
• Selectable delayed action between 175º and 75º. Extends
the closing cycle to allow unobstructed passage.
• Delayed action is functional when hold open is not engaged.
• Dual thermostatic control valves combined with special
hydraulic fluid provide controlled closing from 175º.
• Selectable multipoint hold open between approximately 75º
and 175º.
• Adjustment for start of hold open range or when delayed
action releases. Adjustable between 75º and 105º.