Search results for 'doors'
-
3692 First Choice Series 3690 CVR Panic Exit Device - Standard & Electric Latch Retraction
$240.00First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**
DOWNLOADS
3692 Product Literature
3692 Product Manual / Installation
3600 Series Product Template**Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**
PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
Learn More
- 48" BlackStandard/Manual Device
- 48" MEL Devices - All Finishes -
Von Duprin 9947EO Concealed Vertical Rod Exit Device
$1,695.00The 9947EO is an exit only concealed vertical rod device for use on single or double metal doors.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.The 9947 device has a grooved mechanism case.
This Device is a 9947EO-3'-US26D - Satin Chrome 3 Foot Device
The concealed vertical rod device is non-handed
Door Height Vertical Rods: Round 2-piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm).
Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm).
Extension rod kits available for doors over 8'4" (2533mm).
Dogging Feature: Hex key dogging standard
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Strike: Top - 338 Unfinished, Bottom 385A - UnfinishedDOWNLOADS
Learn More
Data Sheet -
Von Duprin 99EO RIM Exit Device
$1,115.00The Von Duprin 99EO is an exit only rim exit device for all types of single or double doors with mullion.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.The 99 device has a grooved mechanism case.
This Device is a 99EO-3'-US26D -Satin Chrome 3 Foot Device
The rim device is non-handed
Exit Only function
Trim not included
For doors 1-3/4" to 2-1/4" thick
Strike- 299 – Dull Black.
Dogging Feature- Hex key dogging standard.
Latch Bolt-Deadlocking 3/4“ throwDOWNLOADS
Learn More
Data Sheet -
1 1/4" Custom Offset Ladder Pulls ARM3311
$90.00ARM3311 - 1 1/4” diameter with custom center to center offset pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer pulls when not seen. .
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any order with a non-centered mid post must be accompanied by the order form sheet available here Order Form
Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please Specify
Base: 1"
Projection: 3 1/8"
Clearance: 2 7/8"
Offset: 1 5/8"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3311 Cut Sheet -
1 1/4" Custom Straight Ladder Pulls ARM3301
$90.00ARM3301 - 1 1/4” diameter with custom center to center straight pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer Pulls when not seen.
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please specify
Base: 1"
Projection: 3 1/2"
Clearance: 2 1/4"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3301 Cut Sheet -
Norton 1601 Closer
$85.00The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1closers are designed for exterior or interior doors. A full complement of regular and heavy-duty arms, brackets and options make the 1600 Series closers ideal for virtually any medium traffic, commercial application.
Need a Drop Angle Bracket?
Features:
One-piece, heavy duty cast aluminum body
Adjustable 1-6
Full complement of arms available as hold open or non-hold open
Maximum degree of swing is 180°, trim permitting
Tri-style® packaging: regular, top jamb or parallel mounting
Non-handed
2-7/8" projectionBenefits:
Learn More
High strength aluminum alloy closer body provides for long life
Independent latch, sweep and backcheck intensity valves to ensure positive control
Broad variety of arms and applications for any environment
Quick adjust slide arm for easy installation and adjustment
Non-handed for installation on right- or left- hand swing door
Exceeds 25 million cycles
25-year limited warranty
Longer life results in fewer replacements and less material used
Covered by Norton End-of-Life Recycling Program -
Norton 5740K3 - Norton 5700 Series Automatic Door Opener
$2,050.00The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability.
Universal Non-Handed, Push & Pull Mounting, Includes Wireless Push Buttons & 18" Power Cord to Plug Directly Into a120v Outlet
Note: The operator is shipped as a PUSH unit and includes instructions to convert to pull in the field.
Norton 5740K3 Complete Kit Includes:
5700 Operator
Cover
7701-1A Push Arm Assembly
5710-1 Pull Arm Assembly
(2) ADA1019-1 Push Buttons
(2) 548 Transmitters
539 Reciever 5700PC
18" Power cordDOWNLOADS
Installation and Operating Instructions Using Power Cord- Push & Pull Mount
Installation and Operating Instructions Hardwire- Push & Pull Mount
Push To Pull Conversion Instructions
Wiring Instructions
Catalog/Brochure
WarrantyLooking for the Touchless Norton 700 Actuators?
Learn More -
Sweep - Interior Mounted
$14.00Door sweeps are surface applied to the interior face of a door.
They are commonly used on the interior of out swing doors.
Sweeps Screw Applied
Aluminum/Vinyl Sweep
P1275 = Sweep Length is 36"
P1276 = Sweep Length is 42"DOWNLOADS
Learn More
Sweep Cut Sheet -
Door Astragal Pile / Felt
$2.00Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors
P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard
P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard
P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Door Stop Pile / Felt P1098A
$1.00Wool Pile For DoorStops On Tubelite / Aroyan Doors
P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More