Search results for 'mortise'

The P092A is a full mortise 4-1/2" x 4" stainless steel butt hinge which is zero swaged for 1/16" clearance with a beveled stile.

Conforms to ANSI  A5112 - Million Cycle Hinge.

Price is per hinge each

DOWNLOADS
P092A Cut Sheet

RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D Only

The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.

FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited Warranty

DOWNLOADS
0161 Cut Sheet
0161 Installation Manual

SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.

Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input.  (Please ADD the "BR64XL" - Rectifier If you have AC input)

Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, &  Keeper Deadlocked Status.

Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)

When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.

Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.

BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.

DOWNLOADS
Data Sheet

Large Format Interchangeable Mortise Cylinder For Von Duprin Cylinder Dogging Kits.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Adams Rite Locks.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Heavy Duty Power Transfer Device
Concealed Mortise Mount
UL Listed Miscellaneous Fire Door Accessory
UL 10C Positive Pressure Compliant
UBC 7-2 Fire Test for Door Assemblies Compliant.

Chrome Finish Only.

DOWNLOADS
Data Sheet

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.

DOWNLOADS
Product Literature
Product Literature
Product Templates

Cylinder Cam Information

"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Small Format "Best" Interchangeable Cylinder For Adams Rite MS Locks and Latch Locks.
Made of Solid Brass.
1.75" Body Length
(With 002 AR Cam and 5/32" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.

DOWNLOADS
Key Cylinder Cut Sheet

Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.375" Body Length
(With 001 Cam and 5/32" Straight Collars)
For Von Duprin CD Kits
Two Color Options
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.

DOWNLOADS
Key Cylinder Cut Sheet