Search results for 'automatic door opener'
-
Von Duprin 99EO RIM Exit Device
$1,115.00The Von Duprin 99EO is an exit only rim exit device for all types of single or double doors with mullion.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.The 99 device has a grooved mechanism case.
This Device is a 99EO-3'-US26D -Satin Chrome 3 Foot Device
The rim device is non-handed
Exit Only function
Trim not included
For doors 1-3/4" to 2-1/4" thick
Strike- 299 – Dull Black.
Dogging Feature- Hex key dogging standard.
Latch Bolt-Deadlocking 3/4“ throwDOWNLOADS
Learn More
Data Sheet -
Von Duprin 9947EO Concealed Vertical Rod Exit Device
$1,695.00The 9947EO is an exit only concealed vertical rod device for use on single or double metal doors.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.The 9947 device has a grooved mechanism case.
This Device is a 9947EO-3'-US26D - Satin Chrome 3 Foot Device
The concealed vertical rod device is non-handed
Door Height Vertical Rods: Round 2-piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm).
Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm).
Extension rod kits available for doors over 8'4" (2533mm).
Dogging Feature: Hex key dogging standard
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Strike: Top - 338 Unfinished, Bottom 385A - UnfinishedDOWNLOADS
Learn More
Data Sheet -
Sweep - Interior Mounted
$14.00Door sweeps are surface applied to the interior face of a door.
They are commonly used on the interior of out swing doors.
Sweeps Screw Applied
Aluminum/Vinyl Sweep
P1275 = Sweep Length is 36"
P1276 = Sweep Length is 42"DOWNLOADS
Learn More
Sweep Cut Sheet -
Xcluder Pest Control Door Sweep
$60.00 As low as: $45.00Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size doorCut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installationCurrent discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze Anodized
- 5 @ 48" Dk. Bronze AnodizedDOWNLOADS
Learn More
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions -
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
Schlage 679-05HM Concealed Door Position Switch
$55.00Schlage 679-05HM Concealed Door Position Switch
Door position switch is used to detect the open or closed status of an opening and then send this status to a control panel.
Designed for monitoring door positions, roof hatches, gates etc.
- For hollow metal doors and frames
- SPDT Magnetic Switch
- 0.3 Amps @ 30 VDC.
DOWNLOADS
Learn More
Cut Sheet
Installation Template -
Kick Down Door Stop
$10.00Kick Down Door Stop Rubber bumper provides reliable grip on floor Base Length: 2" Base Width: 1 1/2" Reach: 4" Finishes: 689 - Aluminum 695 - Dark Bronze Note: No fasteners are included Learn More -
Ives CS115 Crash Stop / Storm Chain
$35.0025 1/2" Length - Used for 36" Door Width (other sizes available for factory order) - Specially designed for full-size exterior doors - Tear resistant, grey vinyl cover - Heavy duty compression spring assembled to both ends of chain and end brackets - Packed with sheet metal screw. - Cast brass brackets with solid, welded steel chain - 25 1⁄2" - Recommended for 36" door width (product no. CS115-25) Finishes: - 613 Oil Rubbed Bronze Brass 10B - 626 Satin Chrome Brass 26DDOWNLOADS
Learn More
Cut Sheet
Installation Template -
BEA 4.75" square dual stainless push plate for vestibule
$90.00BEA / BEA Activation Plates Sensors, Switches, Relays, Timers / Door Actuators & Plates BEA 10PBDGP1 Stainless steel push plate, 4.75" x 4.75" dual plate, blue text, logo and arrow, for vestibule, includes adapter ringDOWNLOADS
Cut Sheet Learn More -
BEA 1.5" Jamb Stainless steel push plate
$56.00BEA / BEA Activation Plates Sensors, Switches, Relays, Timers / Door Actuators & Plates BEA 10PBJ1 Stainless steel push plate, 1.5" by 4.75", in jamb plate, blue handicap logo and textDOWNLOADS
Cut Sheet Learn More