Sweeps / Accessories / Misc

Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.

Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only

See 2nd Picture For Handing.

LCN 4110-18 PA Mounting Plate for LCN 4111 EDA Closer

DOWNLOADS
Installation Instructions

The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year Warranty

The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.

FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”

**Don't Forget About A Power Supply With Electric Latch Retraction**

DOWNLOADS
MLRK1 Cut Sheet
MLRK1 Installation Manual

Schlage 679-05HM Concealed Door Position Switch

Door position switch is used to detect the open or closed status of an opening and then send this status to a control panel.

Designed for monitoring door positions, roof hatches, gates etc.

• For hollow metal doors and frames
• SPDT Magnetic Switch 
• 0.3 Amps @ 30 VDC.

DOWNLOADS
Cut Sheet
Installation Template

Used with the SDC 45 Series electric Strikes.

The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.

Door sweeps are surface applied to the interior face of a door.
They are commonly used on the interior of out swing doors. 
Sweeps Screw Applied
Aluminum/Vinyl Sweep

P1275 = Sweep Length is 36"

P1276 = Sweep Length is 42"

DOWNLOADS
Sweep Cut Sheet