Search results for 'closer'
-
Norton 1601 Closer
$85.00The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1closers are designed for exterior or interior doors. A full complement of regular and heavy-duty arms, brackets and options make the 1600 Series closers ideal for virtually any medium traffic, commercial application.
Need a Drop Angle Bracket?
Features:
One-piece, heavy duty cast aluminum body
Adjustable 1-6
Full complement of arms available as hold open or non-hold open
Maximum degree of swing is 180°, trim permitting
Tri-style® packaging: regular, top jamb or parallel mounting
Non-handed
2-7/8" projectionBenefits:
Learn More
High strength aluminum alloy closer body provides for long life
Independent latch, sweep and backcheck intensity valves to ensure positive control
Broad variety of arms and applications for any environment
Quick adjust slide arm for easy installation and adjustment
Non-handed for installation on right- or left- hand swing door
Exceeds 25 million cycles
25-year limited warranty
Longer life results in fewer replacements and less material used
Covered by Norton End-of-Life Recycling Program -
LCN 4040XP REG Slide Arm Closer
$0.00The 4040XP Series is LCN’s most durable surface-mounted heavy-duty closer, designed for the most demanding high-use-and-abuse applications.
It meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements.
This closer is cUL listed and UL listed for self-closing doors without hold-open and boasts a 30-year limited warranty.LCN peel-n-stick templates assure quick and accurate installation, and the patented LCN Green Dial takes the guesswork out of spring force adjustments.
Learn More
DOWNLOADS
Catalog Section
Pull Side Installation Instructions -
LCN 4110-18 Mounting Plate
$47.00LCN 4110-18 PA Mounting Plate for LCN 4111 EDA Closer
DOWNLOADS
Learn More
Installation Instructions -
LCN 4111 EDA Heavy Duty Parallel Arm Closer
$0.00LCN 4000/4110 Series
The 4111 is LCN’s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications.LCN 4111 EDA Parallel Arm Model
DOWNLOADS
Catalog Section
Installation Instructions
Mounting Plate Installation InstructionsSee Picture #2 For Handing
EDA Mounting For Push Applications only
Learn More
4110-18 Mounting plate required for where top rail is then 5 1/8", measured from the stop. Plate requires 2" minimum top rail. -
ADA1007P Battery Assembly ADAEZ / Norton 5800
$160.00Battery Assembly for ADAEZ / Norton 5800 1007P
Learn More
Backward compatible with previous closer assemblies.
On-Off switch on the body.
Replacement 24-volt Lithium-ion Battery provides reserve energy to open doors up to 2000 times with no regeneration. -
Dorma RTS 88 Overhead Concealed Closer - REPLACEMENT BODIES ONLY AND 11/16" SPINDLE
$250.00REPLACEMENT BODIES ONLY
NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGEAroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.
The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.
Size 2 = Up to a 2'-6" Exterior Door or 3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI = Interior Door 5lb max opening force for ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for ADA - Available in 105 degrees only.
DOWNLOADS
Product Manual* Closer Sizes 2, 4, BFI, BFE have at least one week lead time from the factory.
Learn More
* All 1/2" Spindle models have at least one week lead time from the factory. -
Dorma BTS 80 Floor Concealed Closer - REPLACEMENT BODIES ONLY
$600.00REPLACEMENT BODIES ONLY
DOWNLOADS
Product Brochure
All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only
Learn More
Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door -
Drop Angle Bracket For "Standard" Closers
$15.00This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.
1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.
Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.
Available in both Clear and Dark Bronze Anodized finishes.
DOWNLOADS
Diagram TemplateExample Closers To Fit This Bracket:
- Norton 1600 Series
- Dormakaba/Stanley QDC300 Series
- LCN 1250 Series
- Falcon SC61
- Hager 5300
- International 8051-TP