Search results for 'hold open door closer'

Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors

P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard

P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard

P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)

All Products Are Currently Only Available in Grey Color

Note: All Products Are Priced PER FOOT.  (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)

Learn More

Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size door

Cut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installation

Current discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze  Anodized
- 5 @ 48" Dk. Bronze Anodized

DOWNLOADS
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions

Learn More

This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.

1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.

Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.

Available in both Clear and Dark Bronze Anodized finishes.

DOWNLOADS
Diagram Template

Example Closers To Fit This Bracket:

• Norton 1600 Series
• Dormakaba/Stanley QDC300 Series
• LCN 1250 Series
• Falcon SC61
• Hager 5300
• International 8051-TP

Learn More

LCN 4110-18 PA Mounting Plate for LCN 4111 EDA Closer

DOWNLOADS
Installation Instructions

Learn More

25 1/2" Length - Used for 36" Door Width (other sizes available for factory order) - Specially designed for full-size exterior doors - Tear resistant, grey vinyl cover - Heavy duty compression spring assembled to both ends of chain and end brackets - Packed with sheet metal screw. - Cast brass brackets with solid, welded steel chain - 25 1⁄2" - Recommended for 36" door width (product no. CS115-25) Finishes: - 613 Oil Rubbed Bronze Brass 10B - 626 Satin Chrome Brass 26D

DOWNLOADS
Cut Sheet
Installation Template

Learn More

Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.

Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only

See 2nd Picture For Handing.

Learn More

Wool Pile For DoorStops On Tubelite / Aroyan Doors

P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin

All Products Are Currently Only Available in Grey Color

Note: All Products Are Priced PER FOOT.  (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)

Learn More

Door sweeps are surface applied to the face of a door.
They are commonly used on the exterior of out swing doors. 
Sweeps Screw Applied
Aluminum/Vinyl Sweep

P1275A = Sweep Length is 36"

P1276A = Sweep Length is 42"

P1277A = Sweep Length is 48"

Please call if you need a BRUSH insert instead.

DOWNLOADS
Sweep Cut Sheet

Learn More

The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More