Search results for 'automatic door opener'

Typically mounted along the edge of "inactive" door stiles for pair of doors.

Offset: 1/4" / Offset: 1/8"
Flush Bolt Length: 12"
Rod Length: 11" (1/4"-20 thread rod)
Square nylon tip with Beveled Corners Fits in 1/2" (13 mm) Square or Round Strike
Bolt Throw: 5/8"
Backset: 7/8"
5/8" adjustment on rod length
Face Plate: 15/16" Wide x 4-1/4" High with 5/32" radius corner
1/4" Offset is Standard for Tubelite Doors on the edge of stile  -  10-24 thread
1/8" Offset is for the face of the stile   -  10-24 thread

Note: Guides NOT included.

Price is for Single Unit, and not a pair.

DOWNLOADS
Data Sheet

The P068 is a Special 1/2 Mortise - 1/2 Slotted hinge. 
This is an old "Tubelite" hinge application.

Price is per hinge each

Tubelite Bottom Pivot Set
Includes Top P795L/R Frame Portion Top P795DB Door Portion
Standard 3/16" Inset Mount Specify Left or Right Hand

DOWNLOADS
Brochure

Tubelite Intermediate Pivot Set
Includes Intermediate P795I L/R Frame and Door Portion
Standard 3/16" Inset Mount Specify Left or Right Hand

DOWNLOADS
Brochure

Tubelite Top Pivot Set
Includes Top P795H Frame Portion Top P795DT Door Portion
Standard 3/16" Inset Mount

DOWNLOADS
Brochure

Not Sure Which Power Supply you need?: Power Supply Selector

1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual

1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual

16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual

16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install Manual

Free Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)

The Record SimpleSwing (SS8200) low energy door operators are heavy duty (HD) for reliable operation like you have never experienced. Designed to handle a maximum door weight of 700lbs -- the SS8200 has been engineered to accomodate most types of inswinging and outswinging doors.

DOWNLOADS
Sell Sheet
Drawing
Warranty

With built-in programmable controls and interfaces for electric strikes—combined with up to a 3-year warranty—the SS8200 simply out performs the competition.

-All units are stocked as: 36" w/ Standard Arms & 35mm Spindals (Overall header width 39.5" long)
-Track Arms can be purchased separately
-For 42", 48", Or Pairs - Please call to order. - (w/ added price & leadtime)

Features

-Can be used for interior or exterior applications
-Surface Mounted
-Push or Pull Same Unit -Non-handed*
-SimpleLynk communications display allows the installer to properly set-up and program the door
-Simple to install and program
-Available for singles stocked and for pairs or double egress doors are factory orde
-Available in clear or dark bronze anodized finishes
-Push to start applications eliminate the need for additional activation accessories and complex wiring
-Latch assist function assures closing in areas with heavy stack conditions
-Interfaces with electric strikes without additional relays or delays
-Breakaway adapter to prevent operator or arm damage when abused
-Various arm options
* Handing can be changed in the field from selected handing when ordered.

Complies with the following standards. ANSI/BHMA A156.19, UL325, UL228, UL10C.

NOTE: The base unit does NOT come with activation push buttons. (Below kits can be ordered for ease, or individual items can be purchased for a custom configuartion)

Activation Push Buttions Kit Details:
No KIt: No Push Buttions, No Mounting Boxes
Kit 1: Includes 2 @ 4.5" Square BEA 10PBS451 buttions & 2 @ BEA 10BOX45SQSM Surface Mounted Boxes
Kit 2: Includes 2 @ 4.5" Square BEA 10PBS451 buttions, 2 @ BEA 10BOX45SQSM Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module 
Kit 3: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions & 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes
Kit 4: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions, 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module

DOWNLOADS
Sell Sheet
Drawing
Warranty

Rixson 218 Bottom Pivot / Center Hung Pivot for aluminum door applications
Complete Package Part Number 2183020 (includes 218007 Pivot Wrench)

This Rixson 218 is a center-hung bottom pivot used with the 700 and 800 M and MW series overhead closers. It has a maximum door weight of 200 pounds and is non-handed.

DOWNLOADS
installation instructions