Search results for 'automatic door opener'

The SL11HD Concealed / Mortsied Continuous Hinge.
The HEAVY DUTY Manufacturing and the Lifetime Warranty give you the safety and PEACE OF MIND that you deserve.  

For door thickness 1 3/4".

NOTE: For Continuous Hinges 95" and over in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. 120" hinges long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
Data Sheet

The SL54HD Half Surfaced Continuous Hinge Mounts on the face of a door and frame rabbet for a perfect solution to hinge replacement. 
The HEAVY DUTY Manufacturing and the Lifetime Warranty give you the safety and PEACE OF MIND that you deserve.  

3/32" door inset.
Narrow frame face.
For door thickness 1 3/8"-1 3/4". (For 2"-2 1/4" with optional long barrel nuts.)

NOTE: For Continuous Hinges 95" and over in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. 120" hinges long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
Data Sheet

Not Sure Which Power Supply you need?: Power Supply Selector

1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual

1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual

16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual

16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install Manual

Free Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)

The SL57HD Continuous Hinge Mounts on the face of a door &fFrame for a perfect solution to hinge replacement.
The HEAVY DUTY Manufacturing and the Lifetime Warranty give you the safety and PEACE OF MIND that you deserve.  

For door thickness 1 3/8"-1 3/4". (For 2"-2 1/4" with optional long barrel nuts.)

NOTE: For Continuous Hinges 95" and over in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. 120" hinges long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
Data Sheet

Battery Assembly for ADAEZ / Norton 5800 1007P
Backward compatible with previous closer assemblies.
On-Off switch on the body.
Replacement 24-volt Lithium-ion Battery provides reserve energy to open doors up to 2000 times with no regeneration.

Designed with round corners for aluminum jambs.
Comes packed with all adapters for either 12/16/24 VAC or VDC inputs.

7400 = Flat Face Plate - (Door Jamb Mount / Single Door Application)
7401 = Round Face Plate -(Door Stile Mount / Pair Of Doors Application)

Fail safe or fail secure functions are field selectable.- (Comes packed as fail secure)
Note: Fail safe units should only be operated with DC power.

DOWNLOADS
Data Sheet

Adams Rite 8400 Narrow Stile Mortise Exit Device
New Old Stock - Blowout Price!
Note: NO Returns on this item. All Sales Final

Note: You can purchase additional/different faceplates from us if what we have doesn't work. (additional added cost and lead time)

A 42" device can be cut down to fit a 36" door

 Current Inventory Includes:
- 2 @ 8432-37336 =  ( RHR "LH" - 36" - Black Anodized - w/ Bevel Face Plate )
- 3 @ 8432-37342 =  ( RHR "LH" - 42" - Black Anodized - w/ Bevel Face Plate )

DOWNLOADS
8400 Cut Sheet

First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.

**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

DOWNLOADS
3692 Product Literature
3692 Product Manual / Installation
3600 Series Product Template

**Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48"  MEL Devices - All Finishes