Search results for 'IL'
-
HES 9600 Surface Mounted Rim Device Electric Strike
$335.00The surface mounted, windstorm rated solution
The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.
ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous dutyDOWNLOADS
Learn More
Data Sheet
Installation Instructions -
Trine 4850 Surface mounted Electric strike for Rim Panic Devices
$315.00Trine 4850 Surface mounted Electric strike for Rim Panic Devices
The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt
FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC OperationDOWNLOADS
Learn More
Data Sheet
Buzzer Size -
LCN 4040XP REG Slide Arm Closer
$0.00The 4040XP Series is LCN’s most durable surface-mounted heavy-duty closer, designed for the most demanding high-use-and-abuse applications.
It meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements.
This closer is cUL listed and UL listed for self-closing doors without hold-open and boasts a 30-year limited warranty.LCN peel-n-stick templates assure quick and accurate installation, and the patented LCN Green Dial takes the guesswork out of spring force adjustments.
Learn More
DOWNLOADS
Catalog Section
Pull Side Installation Instructions -
LCN 4111 EDA Heavy Duty Parallel Arm Closer
$0.00LCN 4000/4110 Series
The 4111 is LCN’s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications.LCN 4111 EDA Parallel Arm Model
DOWNLOADS
Catalog Section
Installation Instructions
Mounting Plate Installation InstructionsSee Picture #2 For Handing
EDA Mounting For Push Applications only
Learn More
4110-18 Mounting plate required for where top rail is then 5 1/8", measured from the stop. Plate requires 2" minimum top rail. -
Schlage AL80BD SAT 626 Storeroom Door Lever Set
Regular Price: $200.00
Special Price $100.00
The Schlage AL80BD Storeroom Lever is perfect for medical, office, hotel, public buildings, religious, multi-family, retail, and government facilities. Both indoor and outdoor applications
AL series has been discontinued and replaced by the ALX
One left - get it on a DISCOUNTED speical price!
Schlage AL80BD SAT 626 Storeroom Door Lever Set without Small Format Interchangeable Core
- Function Entrance
- Grade 2
- Finish: Satin Chrome - 626
- Handing Reversible
- Backset: 2-3/4"
- Latch Type: Square Corner
- Strike: ANSI Strike 10-025
- Door Thickness 1-3/8" to 1-7/8"
- ANSI Certification: Meets or exceeds A156.2 Series 4000, Grade 2 strength and operational requirements.DOWNLOADS
AL-Series Catalog
AL-Service Manual
AL-Installation Instructions
Learn More -
Half Saddle Thresholds
$35.00Mill Finish Aluminum Half Saddle Thresholds.
Learn More
Other Sizes Available on Request.
Bronze, Brass, And other Finish / Base Metal Thresholds Available on Request Please Call.
Anything Over 9 Foot Length is Pickup Only!
E3247 = 5 1/4" x 1/2" -
Saddle Thresholds
$22.00Mill Finish Aluminum Saddle Thresholds.
Learn More
Other Sizes Available on Request.
Bronze, Brass, and other Finish / Base Metal Thresholds Available on Request Please Call.
Anything Over 9 Foot Length is Pickup Only!
E0019 = 4" x 1/2"
E413 = 4" x 1/4"
E277AR = 5" x 1/2" / 7/8"
E513 = 5" x 1/4"
E2550 = 5 1/4" x 1/2"
T2550 = 5 1/4" x 1/2" (Thermal)
E172A = 6" x 1/2"
E613 = 6" x 1/4"
E0009 = 7 1/2" x 1/2"
E2548A = 8" x 1/2"
E2550A = 10" x 1/2" -
.040" Aluminum Break Metal Sheets
$110.00Prefinished .040" Aluminum Sheets in Both Anodized and Painted Finishes.
Available In Full 4' x 8', 4' x 10', and 4' x 12' (All Sheets Pickup Only) or cut sizes pieces may be shipped.
please call to order cut size sheets.(Larger sheets are available upon request)
Learn More -
Aluminum Wall Panels With Resilent Plastic Cores 1/4" & 1"
$300.001" Storefront panels consist of either embossed or smooth aluminum overlay on both sides laminated to 1/8" solid plastic on both sides with 3/4" foam sheet in the middle core to create a 1“ total thickness wall panel.
Learn More
1/4" Thick Storefront panels consist of embossed or smooth aluminum overlay on both sides laminated to an exterior grade 3/16" solid plastic core.
Embossed & Smooth Panels are available In Full 4' x 10' sheets
(Full Sheets are pickup only) or cut sizes pieces may be shipped.
Please call to order cut size sheets. -
First Choice L3 Lever Trim for 3690/3790 Manual Series Exit Devices
$415.00All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.DOWNLOADS
Product Literature
Product Literature
Product Templates"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Learn More