Search results for 'Slip in hinge'

The Schlage ND53BD ATH 626 Entrance Lever is perfect for medical, office, hotel, public buildings, religious, multi-family, retail, and government facilities. Both indoor and outdoor applications

One left at this DISCOUNTED speical price!

Schlage ND53BD ATH 626 Entrance/Office Door Lever Set without Small Format Interchangeable Core
- Function Entrance
- Grade 1
- Finish: Satin Chrome - 626
- Handing Reversible
- Backset: 2-3/4"
- Latch Type: Square Corner
- Strike: ANSI Strike 10-025
- Door Thickness 1-3/8" to 1-7/8"
- ANSI Certification: Meets or exceeds ANSI A156.2 Series 4000, Grade 1

First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.

**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

DOWNLOADS
3692 Product Literature
3692 Product Manual / Installation
3600 Series Product Template

**Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48"  MEL Devices - All Finishes

International DL-4513 latch lock.
1-1/8" Backset
Less Faceplate
Less Key Cylinder
Less Strike Plate

DOWNLOADS
Data Sheet
Strike Plates

Door sweeps are surface applied to the face of a door.
They are commonly used on the exterior of out swing doors. 
Sweeps Screw Applied
Aluminum/Vinyl Sweep

P1275A = Sweep Length is 36"

P1276A = Sweep Length is 42"

P1277A = Sweep Length is 48"

Please call if you need a BRUSH insert instead.

DOWNLOADS
Sweep Cut Sheet

MDC Mortised Ilco Zinc Diecast 1" Dummy Cylinder

Includes Stamped Trim Ring

Blank Face

DOWNLOADS
Key Cylinder Cut Sheet

MKC-KA / MKC-KD Ilco Zinc Diecast 1" (25.4 mm) Mortise Cylinder w/Schlage "C" Keyway AR Cam
 
KD = Keyed Differently
KA = Keyed Alike

AR Cam

Includes Stamped Trim Ring

"AROYAN" Stamped on face

KD (1) = One Cylinder with Key
KD (2) = Two Cylinders with Keys - Keyed Differently
KA (2) = Two Cylinders with Keys - Keyed Alike

DOWNLOADS
Key Cylinder Cut Sheet

MKC-RIM-KD / MKC-RIM-KA Ilco Zinc Diecast 1" (25.4 mm) Mortise Cylinder w/Schlage "C" Keyway

KD = Keyed Differently
KA = Keyed Alike

Includes Stamped Trim Ring

"AROYAN" Stamped on face

KD (1) = One Cylinder with Key
KD (2) = Two Cylinders with Keys - Keyed Differently
KA (2) = Two Cylinders with Keys - Keyed Alike

DOWNLOADS
Key Cylinder Cut Sheet

Kaba Ilco MTC Zinc Diecast 1" Thumbturn AR Cam
 
AR Cam

Includes Stamped Trim Ring

"AROYAN" Stamped on face

DOWNLOADS
Key Cylinder Cut Sheet

Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.375" Body Length
(With 001 Cam and 5/32" Straight Collars)
For Von Duprin CD Kits
Two Color Options
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.

DOWNLOADS
Key Cylinder Cut Sheet