Search results for '25'

Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size door

Cut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installation

Current discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze  Anodized
- 5 @ 48" Dk. Bronze Anodized

DOWNLOADS
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions

The 9947EO is an exit only concealed vertical rod device for use on single or double metal doors.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.

The 9947 device has a grooved mechanism case.

This Device is a 9947EO-3'-US26D - Satin Chrome 3 Foot Device

The concealed vertical rod device is non-handed
Door Height Vertical Rods: Round 2-piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm).
Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm).
Extension rod kits available for doors over 8'4" (2533mm).
Dogging Feature: Hex key dogging standard
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Strike: Top - 338 Unfinished, Bottom 385A - Unfinished

DOWNLOADS
Data Sheet

Surface Mounted Power Transfer Loop with Aluminum Wire Termination Box

DOWNLOADS
Clear = SDC PT-3 Data Sheet
Dark Bronze = First Choice EMT-300-BR

The Schlage ND53BD ATH 626 Entrance Lever is perfect for medical, office, hotel, public buildings, religious, multi-family, retail, and government facilities. Both indoor and outdoor applications

One left at this DISCOUNTED speical price!

Schlage ND53BD ATH 626 Entrance/Office Door Lever Set without Small Format Interchangeable Core
- Function Entrance
- Grade 1
- Finish: Satin Chrome - 626
- Handing Reversible
- Backset: 2-3/4"
- Latch Type: Square Corner
- Strike: ANSI Strike 10-025
- Door Thickness 1-3/8" to 1-7/8"
- ANSI Certification: Meets or exceeds ANSI A156.2 Series 4000, Grade 1

The Schlage AL80BD Storeroom Lever is perfect for medical, office, hotel, public buildings, religious, multi-family, retail, and government facilities. Both indoor and outdoor applications

AL series has been discontinued and replaced by the ALX

One left - get it on a DISCOUNTED speical price!

Schlage AL80BD SAT 626 Storeroom Door Lever Set without Small Format Interchangeable Core
- Function Entrance
- Grade 2
- Finish: Satin Chrome - 626
- Handing Reversible
- Backset: 2-3/4"
- Latch Type: Square Corner
- Strike: ANSI Strike 10-025
- Door Thickness 1-3/8" to 1-7/8"
- ANSI Certification: Meets or exceeds A156.2 Series 4000, Grade 2 strength and operational requirements.

DOWNLOADS
AL-Series Catalog
AL-Service Manual
AL-Installation Instructions

Large Format Interchangeable Rim Cylinder For Panic Devices.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
(With Tailpiece and Stamped 3/32" Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Adams Rite Locks.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Von Duprin Cylinder Dogging Kits.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Mill Finish Aluminum Saddle Thresholds.

Other Sizes Available on Request.

Bronze, Brass, and other Finish / Base Metal Thresholds Available on Request Please Call.

Anything Over 9 Foot Length is Pickup Only!

E0019 = 4" x 1/2"
E413 = 4" x 1/4"
E277AR = 5" x 1/2" / 7/8"
E513 = 5" x 1/4"
E2550 = 5 1/4" x 1/2"
T2550 = 5 1/4" x 1/2" (Thermal)
E172A = 6" x 1/2"
E613 = 6" x 1/4"
E0009 = 7 1/2" x 1/2"
E2548A = 8" x 1/2"
E2550A = 10" x 1/2"