Search results for 'automatic door opener'

Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size door

Cut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installation

Current discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze  Anodized
- 5 @ 48" Dk. Bronze Anodized

DOWNLOADS
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions

Von Duprin EPT-2 / EPT-10 Electrical Power Transfer

EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.

DOWNLOADS
Data Sheet
Installation Instructions

The Von Duprin 99EO is an exit only rim exit device for all types of single or double doors with mullion.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.

The 99 device has a grooved mechanism case.

This Device is a 99EO-3'-US26D -Satin Chrome 3 Foot Device

The rim device is non-handed
Exit Only function
Trim not included
For doors 1-3/4" to 2-1/4" thick
Strike- 299 – Dull Black.
Dogging Feature- Hex key dogging standard.
Latch Bolt-Deadlocking 3/4“ throw

DOWNLOADS
Data Sheet

The 9947EO is an exit only concealed vertical rod device for use on single or double metal doors.
UL listed for Panic Exit Hardware.
Devices are ANSI A156.3 – 2001 Grade 1.

The 9947 device has a grooved mechanism case.

This Device is a 9947EO-3'-US26D - Satin Chrome 3 Foot Device

The concealed vertical rod device is non-handed
Door Height Vertical Rods: Round 2-piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm).
Bottom rod adjustable 35-5/8" (905 mm) to 49-5/8" (1260 mm).
Extension rod kits available for doors over 8'4" (2533mm).
Dogging Feature: Hex key dogging standard
Latch Bolt: Deadlocking Top & Bottom Bolt, 5/8" (16mm) throw
Strike: Top - 338 Unfinished, Bottom 385A - Unfinished

DOWNLOADS
Data Sheet

Trine 4850 Surface mounted Electric strike for Rim Panic Devices

The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt

FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.

Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC Operation

DOWNLOADS
Data Sheet
Buzzer Size

Door sweeps are surface applied to the face of a door.
They are commonly used on the exterior of out swing doors. 
Sweeps Screw Applied
Aluminum/Vinyl Sweep

P1275A = Sweep Length is 36"

P1276A = Sweep Length is 42"

P1277A = Sweep Length is 48"

Please call if you need a BRUSH insert instead.

DOWNLOADS
Sweep Cut Sheet

Door sweeps are surface applied to the interior face of a door.
They are commonly used on the interior of out swing doors. 
Sweeps Screw Applied
Aluminum/Vinyl Sweep

P1275 = Sweep Length is 36"

P1276 = Sweep Length is 42"

DOWNLOADS
Sweep Cut Sheet

The SL57HD Continuous Hinge Mounts on the face of a door &fFrame for a perfect solution to hinge replacement.
The HEAVY DUTY Manufacturing and the Lifetime Warranty give you the safety and PEACE OF MIND that you deserve.  

For door thickness 1 3/8"-1 3/4". (For 2"-2 1/4" with optional long barrel nuts.)

NOTE: For Continuous Hinges 95" and over in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. 120" hinges long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
Data Sheet

The SL54HD Half Surfaced Continuous Hinge Mounts on the face of a door and frame rabbet for a perfect solution to hinge replacement. 
The HEAVY DUTY Manufacturing and the Lifetime Warranty give you the safety and PEACE OF MIND that you deserve.  

3/32" door inset.
Narrow frame face.
For door thickness 1 3/8"-1 3/4". (For 2"-2 1/4" with optional long barrel nuts.)

NOTE: For Continuous Hinges 95" and over in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. 120" hinges long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
Data Sheet