Search results for '3690 series panic'
-
ADA1021 - Kit To Convert To Pull Side - For 5800 Series
Regular Price: $135.00
Special Price $35.00
Norton - ADA1021
This is a kit to convert any 5800 Series device to a Pull Side Mount.
Only 10 units Available at this price
Learn More -
Motorized Latch Retraction Kit for First Choice 3600/3700 Series Exit Device MEL / QEL
$350.00The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year WarrantyThe MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”**Don't Forget About A Power Supply With Electric Latch Retraction**
DOWNLOADS
Learn More
MLRK1 Cut Sheet
MLRK1 Installation Manual -
SDC RMB Buzzer
$35.00Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.
Learn More -
SDC BR64XL Rectifier
$20.00Used with the SDC 45 Series electric Strikes.
The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.
Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load
Learn More -
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
First Choice SW300-2CA Signal Switch
$175.00The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More -
Von Duprin PS914-2RS Power Supply
$800.00Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.DOWNLOADS
Learn More
PS914 Data Sheet
Installation Instructions -
HES 9600 Surface Mounted Rim Device Electric Strike
$335.00The surface mounted, windstorm rated solution
The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.
ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous dutyDOWNLOADS
Learn More
Data Sheet
Installation Instructions -
Kaba Ilco R28207 (SFIC Rim For Panic Devices)
$25.00Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.75" Body Length
(With Tailpiece and 1/4" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Kaba Ilco R28107 (SFIC Mortised Thin Head For CD Kits)
$25.00Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.375" Body Length
(With 001 Cam and 5/32" Straight Collars)
For Von Duprin CD Kits
Two Color Options
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet