Search results for 'tubelite lock'
-
First Choice L3 Lever Trim for 3690/3790 Manual Series Exit Devices
$415.00All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.DOWNLOADS
Product Literature
Product Literature
Product Templates"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Learn More -
1" Heavy Duty Solid Offset Pull Handle
$40.00P005 - "Tubelite's old P1568 Pull Handle" - 1" diameter x 7" center to center pull handle. Heavy duty through-bolt replacement pull handle for old Tubelite stud mount style door pulls. Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Socket FH MS Thru Bolt for heavy duty long lasting application.
P1564 - Tubelite's Standard Pull Handle - 1" diameter x 8" center to center pull handle. Through-bolt replacement pull handle for NEW Tubelite stud mount style door pulls. Each pull handle is fastened with a 1/4 - 20 x 2 1/2" Thru Bolt.
ABF156 - 1” diameter by 8” center to center pull handle. Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Socket FH MS Thru Bolt for heavy duty long lasting application.
ABF157 * - 1” diameter by 10” center to center pull handle. (Aroyan's standard Pull Handle) Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Socket FH MS Thru Bolt for heavy duty long lasting application.
ABF158 - 1” diameter by 12” center to center pull handle. Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Socket FH MS Thru Bolt for heavy duty long lasting application.
*US32D - Brushed Stainless Steel is only in Stocked in-house on the ABF157
Please Call to order Any Pull Type Configuration you can imagine.
US32D, US32, US3, US4, US10, US10B and more are avaibale for order.DOWNLOADS
Learn More
ABF157 Cut Sheet
ABF15747 Cut Sheet -
1" Heavy Duty Solid Push Bar
$40.00Our standard A47 Push Bars are made of solid 1" diameter Aluminum.
Each Push Bar has a 1 5/8" clearance on the lock side of the door which slopes down to 3/8" at the hinge side where a plastic transition block creates clearance from the door.
Each Push Bar is fastened with a 5/16-18 cone head bolt for heavy duty long lasting application at the lock side and a 1/4-20 Button Head Cap Screw at the hinge.
36" Aroyan Door on Butt Hinges = 33 11/16" CTC
36" Aroyan Door on Continous Hinges = 33 7/16" CTC
42" Aroyan Door on Butt Hinges = 39 11/16" CTC
42" Aroyan Door on Continous Hinges = 39 7/16" CTC
Note:
P1565E & P1565G = This will be a factory order and will take up to TWO weeks to receive.
P1565E & P1565G will be fastened with 1/4-20 cone head at lock side and 1/4 - 20 at the hinge side.
P1565E : Stock 36" Tubelite Door on Butt Hinges = 33 3/4" CTC
P1565G : Stock 42" Tubelite Door on Butt Hinges = 39 3/4" CTCDOWNLOADS
Learn More
A47 Cut Sheet
ABF15747 Cut Sheet -
Adams Rite MS1853A Deadbolt
$30.00Adams Rite MS1853A - Bolt of laminated steel, nearly three inches long, activated by an uncomplicated pivot mechanism.
Provides maximum security.
1-1/8" Backset
Less Faceplate
Less Key CylinderDOWNLOADS
Cut Sheet -
International DL-4510 series 1 1/8" Latch Locks
$20.00International DL-4513 latch lock.
1-1/8" Backset
Less Faceplate
Less Key Cylinder
Less Strike PlateDOWNLOADS
Data Sheet
Strike Plates -
Kaba Ilco R28407 (SFIC Mortised Tapered for Adams Rite Locks)
$25.00Small Format "Best" Interchangeable Cylinder For Adams Rite MS Locks and Latch Locks.
Made of Solid Brass.
1.75" Body Length
(With 002 AR Cam and 5/32" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
P025A Slip In Hinge
$24.00The P025A is a 3-1/4" x 4-1/2" Stainless Steel slotted hinge
Old style Tubelite hingePrice is per hinge
2-11 hinges = $ 24.00 each
12-24 hinges = $ 21.60 each
25-36 hinges = $ 20.40 each
37 + = Please callDOWNLOADS
Learn More
P025A Cut Sheet -
P059 Flush Bolt
$15.00Typically mounted along the edge of "inactive" door stiles for pair of doors.
Offset: 1/4" / Offset: 1/8"
Flush Bolt Length: 12"
Rod Length: 11" (1/4"-20 thread rod)
Square nylon tip with Beveled Corners Fits in 1/2" (13 mm) Square or Round Strike
Bolt Throw: 5/8"
Backset: 7/8"
5/8" adjustment on rod length
Face Plate: 15/16" Wide x 4-1/4" High with 5/32" radius corner
1/4" Offset is Standard for Tubelite Doors on the edge of stile - 10-24 thread
1/8" Offset is for the face of the stile - 10-24 thread
Note: Guides NOT included.
Price is for Single Unit, and not a pair.DOWNLOADS
Learn More
Data Sheet -
MS Face Plate
$8.00Fits With MS 1850 Series Locks.. Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only - 7 1/4" x 1 1/8" Comes With Screws. See 2nd Picture For Handing. Learn More -
Latch Lock Face Plate
$8.00Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.
Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only
See 2nd Picture For Handing.
Learn More