Search results for '3690 cvr panic cylinder'

Large Format Interchangeable Mortise Cylinder For Adams Rite Locks.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Von Duprin Cylinder Dogging Kits.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

The 4040XP Series is LCN’s most durable surface-mounted heavy-duty closer, designed for the most demanding high-use-and-abuse applications.
It meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements.
This closer is cUL listed and UL listed for self-closing doors without hold-open and boasts a 30-year limited warranty.

LCN peel-n-stick templates assure quick and accurate installation, and the patented LCN Green Dial takes the guesswork out of spring force adjustments.

DOWNLOADS
Catalog Section
Pull Side Installation Instructions

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.

DOWNLOADS
Product Literature
Product Literature
Product Templates

Cylinder Cam Information

"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Not Sure Which Power Supply you need?: Power Supply Selector

1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual

1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual

16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual

16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install Manual

Free Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)

First Choice Series 3792 Rim Panic Exit Device, With Cylinder Prep, Less Key Cylinder
Packaging powerful security into a compact size, the 3792 can be mounted on doors with stiles as narrow as 2” and includes a 1” forged steel latch bolt.
Non-handed and available for doors up to 4 feet, the 3792 is a convenient solution for demanding, busy traffic conditions.
These durable devices are ANSI Grade I (500,000 cycles) and UL Listed.
Striking anodized finishes are accented with high-performance coatings on solid metal end clips.
The 3792, EL3792, MEL3792 can retrofit the old Dor-0-Matic crash bar (part # 2090) and it also can replace the Dor-0-Matic 1790.

**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

DOWNLOADS
3792 Product Literature
3792 Product Manual / Installation
3700 Series Product Template

**Aroyan Can Not Warranty an EL/MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

 PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48"  MEL Devices - All Finishes
- ALL Solenoid EL Devices are being DISCONTINUED! - If you need a Solenoid EL device we have very limited in stock, please call to verify. Once they are gone, they are gone.

Current discontinued 16 amp EL Inventory Includes:
- 3 @ EL3792-36" Clear Anodized
- 4 @ EL3792-36" Dk. Bronze Anodized
- 4 @ EL3792-42" Clear Anodized
- 2 @ EL3792-42" Dk. Bronze Anodized

Adams Rite MS1853A - Bolt of laminated steel, nearly three inches long, activated by an uncomplicated pivot mechanism.
Provides maximum security.
1-1/8" Backset
Less Faceplate
Less Key Cylinder

DOWNLOADS
Cut Sheet

International DL-4513 latch lock.
1-1/8" Backset
Less Faceplate
Less Key Cylinder
Less Strike Plate

DOWNLOADS
Data Sheet
Strike Plates

MDC Mortised Ilco Zinc Diecast 1" Dummy Cylinder

Includes Stamped Trim Ring

Blank Face

DOWNLOADS
Key Cylinder Cut Sheet