Search results for '3690 series panic'

Large Format Interchangeable Rim Cylinder For Panic Devices.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
(With Tailpiece and Stamped 3/32" Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Learn More

This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.

1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.

Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.

Available in both Clear and Dark Bronze Anodized finishes.

DOWNLOADS
Diagram Template

Example Closers To Fit This Bracket:

• Norton 1600 Series
• Dormakaba/Stanley QDC300 Series
• LCN 1250 Series
• Falcon SC61
• Hager 5300
• International 8051-TP

Learn More

Norton - ADA1024

This is a kit to convert any 5800 Series device to a Push Side Mount.

Only 1 unit Available at this price

Learn More

Norton - ADA1021

This is a kit to convert any 5800 Series device to a Pull Side Mount.

Only 10 units Available at this price

Learn More

The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year Warranty

The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.

FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”

**Don't Forget About A Power Supply With Electric Latch Retraction**

DOWNLOADS
MLRK1 Cut Sheet
MLRK1 Installation Manual

Learn More

Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.

Learn More

Used with the SDC 45 Series electric Strikes.

The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

Learn More

SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.

Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input.  (Please ADD the "BR64XL" - Rectifier If you have AC input)

Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, &  Keeper Deadlocked Status.

Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)

When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.

Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.

BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.

DOWNLOADS
Data Sheet

Learn More

The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More