Search results for 'Visit Cheapfifa23coins.com 30% OFF code:FIFA2023| 1) Extremely satisfied 2) All I can say Cheapfifa23coins.com is amazing site f'
Maximum words count is 10. In your search query was cut next part: I can say is amazing site f.
-
Von Duprin PS914-2RS Power Supply
$800.00Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.DOWNLOADS
Learn More
PS914 Data Sheet
Installation Instructions -
Von Duprin EPT (Electric Power Transfer)
$375.00Von Duprin EPT-2 / EPT-10 Electrical Power Transfer
EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.DOWNLOADS
Learn More
Data Sheet
Installation Instructions -
HES 2006M Plug-In Buzzer
$35.00Add sound to your electric strike activation with a plug-in buzzer
Need to know when people are entering?
With the addition of a plug-in buzzer, you'll hear an audible sound every time the strike is energized.
An easy way to add security to your access control system.Works With either 12vDC or 24vDC systems
DOWNLOADS
Learn More
Installation Instructions -
HES 9600 Surface Mounted Rim Device Electric Strike
$335.00The surface mounted, windstorm rated solution
The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.
ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous dutyDOWNLOADS
Learn More
Data Sheet
Installation Instructions -
Trine 4850 Surface mounted Electric strike for Rim Panic Devices
$315.00Trine 4850 Surface mounted Electric strike for Rim Panic Devices
The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt
FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC OperationDOWNLOADS
Learn More
Data Sheet
Buzzer Size -
LCN 4040XP REG Slide Arm Closer
$0.00The 4040XP Series is LCN’s most durable surface-mounted heavy-duty closer, designed for the most demanding high-use-and-abuse applications.
It meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements.
This closer is cUL listed and UL listed for self-closing doors without hold-open and boasts a 30-year limited warranty.LCN peel-n-stick templates assure quick and accurate installation, and the patented LCN Green Dial takes the guesswork out of spring force adjustments.
Learn More
DOWNLOADS
Catalog Section
Pull Side Installation Instructions -
Norton Touchless Actuators 700
$325.00Norton 700 Touchless Actuator Single gang AND double gang packaged together The sensor requires movement for activation Motion Sensor 0"-4" range 0-35 Second Variable Hold Satin Stainless Steel Dimensions: 3" W x 4-3/4" H (Single), 4-1/2" W x 4-1/2" H (Double) Compatible with the following Norton operators: 5600 Series, 5700 Series (5740K3), 5800 Series (ADAEZ), 6000 Series, and 6300 Series Please Note: You Get ONE Switch and two faceplates in the box.
DOWNLOADS
Learn More
INSTALLATION INSTRUCTIONS -
Sneeze Guard / Safety Divider / Partition Posts - Surface Mounted
$50.00These protective posts are designed to create a defensive barrier that allows for interactions while easing the concerns of your employees and customers.
The ideal solution to protect your staff and customers from the rapid spread of airborne bacterial germs and viruses caused by sneezing and coughing.
Used to separate restaurant booths, counters, office desks, banks, retail store cashier sections, or just about anywhere you can think of.
Diameter: 1" dia. tube.
Finish: Brushed (satin) stainless steel - US32D
Height: 30" tall - Can be recut to any length. (Remove bottom mounting foot and cut with pipe cutter, then reattach foot)
Adjustable clamps accept 1/4" or 3/8" Glass, Plexi, Lexan. (Note: Glass, Plexi, Lexan is not included)
Glazing Secured by nylon-tipped set screws.
Claps are adjustable to any angle!
Glass recommendation: We recommend setting your vertical posts in place prior to ordering from your local glass company. This will ensure proper sizing and fit. The glass can extend past the top of the vertical tube to make it taller than 30”. You can also hold the glass up 5” for example or have the glass cut to have a “pass-through” at the bottom. We recommend you get the glass with polished edges. Please consult a glass company for recommended maximum spans depending on glazing selected.Note: fasteners NOT included due to varting surface mounting conditions.
If you need a WALL MOUNTED bracket for these vertical posts please click HERE
Learn More -
Schlage 679-05HM Concealed Door Position Switch
$55.00Schlage 679-05HM Concealed Door Position Switch
Door position switch is used to detect the open or closed status of an opening and then send this status to a control panel.
Designed for monitoring door positions, roof hatches, gates etc.
- For hollow metal doors and frames
- SPDT Magnetic Switch
- 0.3 Amps @ 30 VDC.
DOWNLOADS
Learn More
Cut Sheet
Installation Template -
Drop Angle Bracket For "Standard" Closers
$15.00This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.
1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.
Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.
Available in both Clear and Dark Bronze Anodized finishes.
DOWNLOADS
Diagram TemplateExample Closers To Fit This Bracket:
- Norton 1600 Series
- Dormakaba/Stanley QDC300 Series
- LCN 1250 Series
- Falcon SC61
- Hager 5300
- International 8051-TP