Search results for 'FIRST CHOICE ELECTRIC PANIC'

Surface Mounted Power Transfer Loop with Aluminum Wire Termination Box

DOWNLOADS
Clear = SDC PT-3 Data Sheet
Dark Bronze = First Choice EMT-300-BR

Trine 4850 Surface mounted Electric strike for Rim Panic Devices

The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt

FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.

Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC Operation

DOWNLOADS
Data Sheet
Buzzer Size

The surface mounted, windstorm rated solution

The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.

The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous duty

DOWNLOADS
Data Sheet
Installation Instructions

Add sound to your electric strike activation with a plug-in buzzer

Need to know when people are entering?
With the addition of a plug-in buzzer, you'll hear an audible sound every time the strike is energized.
An easy way to add security to your access control system.

Works With either 12vDC or 24vDC systems

DOWNLOADS
Installation Instructions

Von Duprin EPT-2 / EPT-10 Electrical Power Transfer

EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.

DOWNLOADS
Data Sheet
Installation Instructions

Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.

DOWNLOADS
PS914 Data Sheet
Installation Instructions