Search results for 'FIRST CHOICE ELECTRIC PANIC'
-
Kaba Ilco R28207 (SFIC Rim For Panic Devices)
$25.00Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.75" Body Length
(With Tailpiece and 1/4" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Norton 5845xNPB - Norton 5800 Series Automatic Door Opener (ADAEZ PRO Complete)
$2,225.00As one of the world’s only regenerative power door operators, Norton’s 5845 x NBP (ADA EZ) Series is certified by GreenCircle to reduce energy consumption by as much as 100 percent versus other comparable operators. Available in wireless and plug-in versions and able to fit in the tightest of spaces, the 5800 ADAEZ is simple to install and use.
If the power goes out in the building, this operator will still function.
Need This to Work With An Electric Strike, Card Reader, Fire Panel, Access Control? Grab the ADA1028W WIM Card Sold Seprately..
DOWNLOADS
Learn More
Installation and Operating Instructions - Push Mount
Installation and Operating Instructions - Pull Mount
WIM Card
Installation Video
Full Catalog
Brochure
Efficiency Plug-in
Efficiency Wireless
Warranty -
Power Supplies for First Choice MEL & EL Panic Devies
$150.00Not Sure Which Power Supply you need?: Power Supply Selector
1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install ManualFree Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)
Learn More -
First Choice L3 Lever Trim for 3690/3790 Manual Series Exit Devices
$415.00All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.DOWNLOADS
Product Literature
Product Literature
Product Templates"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)All L3 Levers are Factory Ordered, 3-5 weeks lead time.
Learn More -
Surface Mount Power Loop Transfer Box
$25.00Surface Mounted Power Transfer Loop with Aluminum Wire Termination Box
DOWNLOADS
Learn More
Clear = SDC PT-3 Data Sheet
Dark Bronze = First Choice EMT-300-BR -
Trine 4850 Surface mounted Electric strike for Rim Panic Devices
$315.00Trine 4850 Surface mounted Electric strike for Rim Panic Devices
The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt
FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC OperationDOWNLOADS
Learn More
Data Sheet
Buzzer Size -
HES 9600 Surface Mounted Rim Device Electric Strike
$335.00The surface mounted, windstorm rated solution
The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.
ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous dutyDOWNLOADS
Learn More
Data Sheet
Installation Instructions -
HES 2006M Plug-In Buzzer
$35.00Add sound to your electric strike activation with a plug-in buzzer
Need to know when people are entering?
With the addition of a plug-in buzzer, you'll hear an audible sound every time the strike is energized.
An easy way to add security to your access control system.Works With either 12vDC or 24vDC systems
DOWNLOADS
Learn More
Installation Instructions -
Von Duprin EPT (Electric Power Transfer)
$375.00Von Duprin EPT-2 / EPT-10 Electrical Power Transfer
EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.DOWNLOADS
Learn More
Data Sheet
Installation Instructions -
Von Duprin PS914-2RS Power Supply
$800.00Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.DOWNLOADS
Learn More
PS914 Data Sheet
Installation Instructions