Search results for 'PO'

The surface mounted, windstorm rated solution

The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.

The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous duty

DOWNLOADS
Data Sheet
Installation Instructions

First Choice Series 3792 Rim Panic Exit Device, With Cylinder Prep, Less Key Cylinder
Packaging powerful security into a compact size, the 3792 can be mounted on doors with stiles as narrow as 2” and includes a 1” forged steel latch bolt.
Non-handed and available for doors up to 4 feet, the 3792 is a convenient solution for demanding, busy traffic conditions.
These durable devices are ANSI Grade I (500,000 cycles) and UL Listed.
Striking anodized finishes are accented with high-performance coatings on solid metal end clips.
The 3792, EL3792, MEL3792 can retrofit the old Dor-0-Matic crash bar (part # 2090) and it also can replace the Dor-0-Matic 1790.

**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

DOWNLOADS
3792 Product Literature
3792 Product Manual / Installation
3700 Series Product Template

**Aroyan Can Not Warranty an EL/MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

 PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48"  MEL Devices - All Finishes
- ALL Solenoid EL Devices are being DISCONTINUED! - If you need a Solenoid EL device we have very limited in stock, please call to verify. Once they are gone, they are gone.

Current discontinued 16 amp EL Inventory Includes:
- 3 @ EL3792-36" Clear Anodized
- 4 @ EL3792-36" Dk. Bronze Anodized
- 4 @ EL3792-42" Clear Anodized
- 2 @ EL3792-42" Dk. Bronze Anodized

Rixson 218 Bottom Pivot / Center Hung Pivot for aluminum door applications
Complete Package Part Number 2183020 (includes 218007 Pivot Wrench)

This Rixson 218 is a center-hung bottom pivot used with the 700 and 800 M and MW series overhead closers. It has a maximum door weight of 200 pounds and is non-handed.

DOWNLOADS
installation instructions

Designed with round corners for aluminum jambs.
Comes packed with all adapters for either 12/16/24 VAC or VDC inputs.

7400 = Flat Face Plate - (Door Jamb Mount / Single Door Application)
7401 = Round Face Plate -(Door Stile Mount / Pair Of Doors Application)

Fail safe or fail secure functions are field selectable.- (Comes packed as fail secure)
Note: Fail safe units should only be operated with DC power.

DOWNLOADS
Data Sheet

Kaba Ilco 28026
6 Pin Aroyan Temporary Core.
Solid Brass
Come with 1 Control Key and 1 Operating Key.
Replaces Arrow, Best, Falcon, KSP
Painted Teal.

DOWNLOADS
Key Cylinder Cut Sheet

REPLACEMENT BODIES ONLY

DOWNLOADS
Product Brochure

All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".

Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only

Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door

REPLACEMENT BODIES ONLY

NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGE

Aroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.

The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.

Size 2 = Up to a 2'-6" Exterior Door  or  3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door 
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI =  Interior Door 5lb max opening force for  ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for  ADA - Available in 105 degrees only.

DOWNLOADS
Product Manual

* Closer Sizes  2, 4, BFI, BFE have at least one week lead time from the factory.
* All 1/2" Spindle models have at least one week lead time from the factory.

As one of the world’s only regenerative power door operators, Norton’s 5845 x NBP (ADA EZ) Series is certified by GreenCircle to reduce energy consumption by as much as 100 percent versus other comparable operators. Available in wireless and plug-in versions and able to fit in the tightest of spaces, the 5800 ADAEZ is simple to install and use.

If the power goes out in the building, this operator will still function.

Need This to Work With An Electric Strike, Card Reader, Fire Panel, Access Control? Grab the ADA1028W WIM Card Sold Seprately..

DOWNLOADS
Installation and Operating Instructions - Push Mount
Installation and Operating Instructions - Pull Mount
WIM Card
Installation Video
Full Catalog
Brochure
Efficiency Plug-in
Efficiency Wireless
Warranty

Not Sure Which Power Supply you need?: Power Supply Selector

1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual

1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual

16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual

16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install Manual

Free Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)