Search results for 'doors'
-
Dorma BTS 80 Floor Concealed Closer - REPLACEMENT BODIES ONLY
$600.00REPLACEMENT BODIES ONLY
DOWNLOADS
Product Brochure
All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only
Learn More
Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door -
Dorma RTS 88 Overhead Concealed Closer - REPLACEMENT BODIES ONLY AND 11/16" SPINDLE
$250.00REPLACEMENT BODIES ONLY
NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGEAroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.
The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.
Size 2 = Up to a 2'-6" Exterior Door or 3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI = Interior Door 5lb max opening force for ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for ADA - Available in 105 degrees only.
DOWNLOADS
Product Manual* Closer Sizes 2, 4, BFI, BFE have at least one week lead time from the factory.
Learn More
* All 1/2" Spindle models have at least one week lead time from the factory. -
Norton 5845xNPB - Norton 5800 Series Automatic Door Opener (ADAEZ PRO Complete)
$2,225.00As one of the world’s only regenerative power door operators, Norton’s 5845 x NBP (ADA EZ) Series is certified by GreenCircle to reduce energy consumption by as much as 100 percent versus other comparable operators. Available in wireless and plug-in versions and able to fit in the tightest of spaces, the 5800 ADAEZ is simple to install and use.
If the power goes out in the building, this operator will still function.
Need This to Work With An Electric Strike, Card Reader, Fire Panel, Access Control? Grab the ADA1028W WIM Card Sold Seprately..
DOWNLOADS
Learn More
Installation and Operating Instructions - Push Mount
Installation and Operating Instructions - Pull Mount
WIM Card
Installation Video
Full Catalog
Brochure
Efficiency Plug-in
Efficiency Wireless
Warranty -
P059 Flush Bolt
$15.00Typically mounted along the edge of "inactive" door stiles for pair of doors.
Offset: 1/4" / Offset: 1/8"
Flush Bolt Length: 12"
Rod Length: 11" (1/4"-20 thread rod)
Square nylon tip with Beveled Corners Fits in 1/2" (13 mm) Square or Round Strike
Bolt Throw: 5/8"
Backset: 7/8"
5/8" adjustment on rod length
Face Plate: 15/16" Wide x 4-1/4" High with 5/32" radius corner
1/4" Offset is Standard for Tubelite Doors on the edge of stile - 10-24 thread
1/8" Offset is for the face of the stile - 10-24 thread
Note: Guides NOT included.
Price is for Single Unit, and not a pair.DOWNLOADS
Learn More
Data Sheet -
MS Face Plate
$8.00Fits With MS 1850 Series Locks.. Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only - 7 1/4" x 1 1/8" Comes With Screws. See 2nd Picture For Handing. Learn More -
Latch Lock Face Plate
$8.00Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.
Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only
See 2nd Picture For Handing.
Learn More -
Power Supplies for First Choice MEL & EL Panic Devies
$150.00Not Sure Which Power Supply you need?: Power Supply Selector
1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install ManualFree Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)
Learn More -
Schlage 679-05HM Concealed Door Position Switch
$55.00Schlage 679-05HM Concealed Door Position Switch
Door position switch is used to detect the open or closed status of an opening and then send this status to a control panel.
Designed for monitoring door positions, roof hatches, gates etc.
- For hollow metal doors and frames
- SPDT Magnetic Switch
- 0.3 Amps @ 30 VDC.
DOWNLOADS
Learn More
Cut Sheet
Installation Template