Search results for 'handles 10" on center'
-
1 1/4" Custom Straight Ladder Pulls ARM3301
$90.00ARM3301 - 1 1/4” diameter with custom center to center straight pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer Pulls when not seen.
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please specify
Base: 1"
Projection: 3 1/2"
Clearance: 2 1/4"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3301 Cut Sheet -
ADA1023 External Battery Charger Kit ADAEZ / NORTON 5800
$210.00Norton ADAEZ
Learn More
External Battery Charger Kit ADA1023
The external charger will come configured with the correct plug to connect into the ADAEZ battery. -
Norton 1601 Closer
$85.00The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1closers are designed for exterior or interior doors. A full complement of regular and heavy-duty arms, brackets and options make the 1600 Series closers ideal for virtually any medium traffic, commercial application.
Need a Drop Angle Bracket?
Features:
One-piece, heavy duty cast aluminum body
Adjustable 1-6
Full complement of arms available as hold open or non-hold open
Maximum degree of swing is 180°, trim permitting
Tri-style® packaging: regular, top jamb or parallel mounting
Non-handed
2-7/8" projectionBenefits:
Learn More
High strength aluminum alloy closer body provides for long life
Independent latch, sweep and backcheck intensity valves to ensure positive control
Broad variety of arms and applications for any environment
Quick adjust slide arm for easy installation and adjustment
Non-handed for installation on right- or left- hand swing door
Exceeds 25 million cycles
25-year limited warranty
Longer life results in fewer replacements and less material used
Covered by Norton End-of-Life Recycling Program -
First Choice SW300-2CA Signal Switch
$175.00The SW300-2CA is a signal switch capable of providing a contact circuit monitoring push bar position. The Switch is field selectable normally open or normally closed. Works with the 3690 series CVR's and 3790 series RIM devices in both manual and electrified.
Installation Manual Learn More -
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
SDC BR64XL Rectifier
$20.00Used with the SDC 45 Series electric Strikes.
The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.
Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load
Learn More -
BEA 4.75" square dual stainless push plate for vestibule
$90.00BEA / BEA Activation Plates Sensors, Switches, Relays, Timers / Door Actuators & Plates BEA 10PBDGP1 Stainless steel push plate, 4.75" x 4.75" dual plate, blue text, logo and arrow, for vestibule, includes adapter ringDOWNLOADS
Cut Sheet Learn More -
ADA1025 Timer - Altronix 6062 Timer
Regular Price: $25.00
Special Price $10.00
ADA1025 / 6062 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher.
Only 3 units Available at this price
DOWNLOADS
Learn More
Cut Sheet
Install Manual -
ADA1021 - Kit To Convert To Pull Side - For 5800 Series
Regular Price: $135.00
Special Price $35.00
Norton - ADA1021
This is a kit to convert any 5800 Series device to a Pull Side Mount.
Only 10 units Available at this price
Learn More -
ADA1024 - Kit To Convert To Push Side - For 5800 Series
Regular Price: $153.00
Special Price $35.00
Norton - ADA1024
This is a kit to convert any 5800 Series device to a Push Side Mount.
Only 1 unit Available at this price
Learn More