Search results for 'hold open door closer'
-
SDC 45 Series Electric Strikes
$115.00SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.
Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input. (Please ADD the "BR64XL" - Rectifier If you have AC input)Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, & Keeper Deadlocked Status.
Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.
Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.
BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.
Learn More
DOWNLOADS
Data Sheet -
HES 9600 Surface Mounted Rim Device Electric Strike
$335.00The surface mounted, windstorm rated solution
The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.
ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous dutyDOWNLOADS
Learn More
Data Sheet
Installation Instructions -
Trine 4850 Surface mounted Electric strike for Rim Panic Devices
$315.00Trine 4850 Surface mounted Electric strike for Rim Panic Devices
The most flexible electric strike for use with surface mounted rim exit devices with up to 1” Throw Bolt
FEATURES
Fail-safe/Fail-secure (field selectable).
Built-in electronics automatically allow 11 thru 28 DC Voltage input - with surge and kickback protection
1/2” thick Surface Mount that comes with a 1/4” and with two (2) 1/16” Spacers - the most versatile rim panic strike NOW provides the flexibility of 6 different sizes!
Cavity is completely open -- which means the 4850 allows for an incremental depth up to a 1" throw
Comes with Trines Patented 6-Pin Anchoring System
Contains a one piece locking mechanism with one Solenoid
BHMA Grade 1 Electric Strike -- 1,000,000+ Life cycles -- 1,500+ lbs. Holding Force
No cutting or worrying about voltage means you are always prepared.Add in a Buzzer above
BZ-12 = Audible Buzzer for 12v DC Operation
BZ-24 = Audible Buzzer for 24v DC OperationDOWNLOADS
Learn More
Data Sheet
Buzzer Size -
Dorma RTS 88 Overhead Concealed Closer - REPLACEMENT BODIES ONLY AND 11/16" SPINDLE
$250.00REPLACEMENT BODIES ONLY
NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGEAroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.
The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.
Size 2 = Up to a 2'-6" Exterior Door or 3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI = Interior Door 5lb max opening force for ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for ADA - Available in 105 degrees only.
DOWNLOADS
Product Manual* Closer Sizes 2, 4, BFI, BFE have at least one week lead time from the factory.
Learn More
* All 1/2" Spindle models have at least one week lead time from the factory. -
Dorma BTS 80 Floor Concealed Closer - REPLACEMENT BODIES ONLY
$600.00REPLACEMENT BODIES ONLY
DOWNLOADS
Product Brochure
All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only
Learn More
Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door -
Sweep w/ Rain Drip
$14.00Door sweeps are surface applied to the face of a door.
They are commonly used on the exterior of out swing doors.
Sweeps Screw Applied
Aluminum/Vinyl Sweep
P1275A = Sweep Length is 36"
P1276A = Sweep Length is 42"P1277A = Sweep Length is 48"
Please call if you need a BRUSH insert instead.DOWNLOADS
Learn More
Sweep Cut Sheet -
Kaba Ilco 4590 (Deadlatch Paddle)
$40.00Corrosion resistant extruded aluminum construction, available in clear anodized, Black Anodized. zinc alloy escutcheon with a black hard coat finish. Reversible handing using cam plug.
Includes self-adhesive Push and Pull decals
Cycle testing exceeds ANSI Grade 1 standards
Learn More
DOWNLOADS
Installation Instructions
An alternative to knob or lever handles. Makes opening a latched door as natural as opening an unlatched one. Just push or pull in any Adams Rite series 4500 deadlatch. Fits doors up to 1-3/4" thick.
Note: Please CAREFULLY review picture #2, so as to choose the correct door swing, before ordering. -
Adams Rite 4591 (Deadlatch Paddle)
$70.00Corrosion resistant extruded aluminum construction, available in clear anodized, Black Anodized. zinc alloy escutcheon with a black hard coat finish. Reversible handing using cam plug.
Includes self-adhesive Push and Pull decals
Cycle testing exceeds ANSI Grade 1 standardsDOWNLOADS
Data Sheet
Installation InstructionsAn alternative to knob or lever handles. Makes opening a latched door as natural as opening an unlatched one. Just push or pull in any Adams Rite series 4500 deadlatch. Fits doors up to 1-3/4" thick.
Learn More
Note: Please CAREFULLY review picture #2, so as to choose the correct door swing, before ordering. -
Adams Rite 7400 & 7401 Series Electric Strikes
$200.00Designed with round corners for aluminum jambs.
Comes packed with all adapters for either 12/16/24 VAC or VDC inputs.
7400 = Flat Face Plate - (Door Jamb Mount / Single Door Application)
7401 = Round Face Plate -(Door Stile Mount / Pair Of Doors Application)
Fail safe or fail secure functions are field selectable.- (Comes packed as fail secure)
Note: Fail safe units should only be operated with DC power.DOWNLOADS
Learn More
Data Sheet -
Rixson 218 Bottom Pivot
$110.00Rixson 218 Bottom Pivot / Center Hung Pivot for aluminum door applications
Complete Package Part Number 2183020 (includes 218007 Pivot Wrench)
This Rixson 218 is a center-hung bottom pivot used with the 700 and 800 M and MW series overhead closers. It has a maximum door weight of 200 pounds and is non-handed.DOWNLOADS
Learn More
installation instructions