Search results for 'el'
-
3792 First Choice Series 3790 Rim Panic Exit Device - Standard & Electric Latch Retraction
$240.00First Choice Series 3792 Rim Panic Exit Device, With Cylinder Prep, Less Key Cylinder
Packaging powerful security into a compact size, the 3792 can be mounted on doors with stiles as narrow as 2” and includes a 1” forged steel latch bolt.
Non-handed and available for doors up to 4 feet, the 3792 is a convenient solution for demanding, busy traffic conditions.
These durable devices are ANSI Grade I (500,000 cycles) and UL Listed.
Striking anodized finishes are accented with high-performance coatings on solid metal end clips.
The 3792, EL3792, MEL3792 can retrofit the old Dor-0-Matic crash bar (part # 2090) and it also can replace the Dor-0-Matic 1790.**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**
DOWNLOADS
3792 Product Literature
3792 Product Manual / Installation
3700 Series Product Template**Aroyan Can Not Warranty an EL/MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**
PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48" MEL Devices - All Finishes
- ALL Solenoid EL Devices are being DISCONTINUED! - If you need a Solenoid EL device we have very limited in stock, please call to verify. Once they are gone, they are gone.Current discontinued 16 amp EL Inventory Includes:
Learn More
- 3 @ EL3792-36" Clear Anodized
- 4 @ EL3792-36" Dk. Bronze Anodized
- 4 @ EL3792-42" Clear Anodized
- 2 @ EL3792-42" Dk. Bronze Anodized -
P059 Flush Bolt
$15.00Typically mounted along the edge of "inactive" door stiles for pair of doors.
Offset: 1/4" / Offset: 1/8"
Flush Bolt Length: 12"
Rod Length: 11" (1/4"-20 thread rod)
Square nylon tip with Beveled Corners Fits in 1/2" (13 mm) Square or Round Strike
Bolt Throw: 5/8"
Backset: 7/8"
5/8" adjustment on rod length
Face Plate: 15/16" Wide x 4-1/4" High with 5/32" radius corner
1/4" Offset is Standard for Tubelite Doors on the edge of stile - 10-24 thread
1/8" Offset is for the face of the stile - 10-24 thread
Note: Guides NOT included.
Price is for Single Unit, and not a pair.DOWNLOADS
Learn More
Data Sheet -
MS Face Plate
$8.00Fits With MS 1850 Series Locks.. Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only - 7 1/4" x 1 1/8" Comes With Screws. See 2nd Picture For Handing. Learn More -
Latch Lock Face Plate
$8.00Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.
Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only
See 2nd Picture For Handing.
Learn More -
Rockwood 106-RKW Straight Pull 6" CTC
$20.00Rockwood 106-RKW Straight Pull
SPECIFICATIONS
Material Size: 3/4" dia.
CTC: 6"
Overall: 6-3⁄4"
Projection: 2-5/8"
Clearance: 1-7/8"
Mounting: standard duty 1/4-20 Thru-Bolt for Single Pull Application Single or Back to back mounting available.In STOCK in Clear Anodized and Dark Bronze Anodized Only
*US32D Only available by Factory order.
*US32 Only available by Factory order.
*US3 Only available by Factory order.
*US4 Only available by Factory order.DOWNLOADS
Learn More
Data Sheet -
Von Duprin PS902 Power Supply
$205.00Base Power Supply (2A @ 12/24 VDC field selectable).
PS902 Works Von Duprin EL Lever Handles
PS902-2RS (900-2RS Board) Works Von Duprin QEL Panic Devices2A @ 12/24 VDC output, field selectable with jumper.
Low voltage DC, regulated and filtered output.
Class 2 Rated power limited output.
AC input and DC output monitoring circuit w/ LED indicators.
Universal 120-240 VAC input.
Learn More
DOWNLOADS
PS902 Data Sheet
Installation Instructions -
Von Duprin PS914-2RS Power Supply
$800.00Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.DOWNLOADS
Learn More
PS914 Data Sheet
Installation Instructions -
Von Duprin EPT (Electric Power Transfer)
$375.00Von Duprin EPT-2 / EPT-10 Electrical Power Transfer
EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.DOWNLOADS
Learn More
Data Sheet
Installation Instructions -
HES 2006M Plug-In Buzzer
$35.00Add sound to your electric strike activation with a plug-in buzzer
Need to know when people are entering?
With the addition of a plug-in buzzer, you'll hear an audible sound every time the strike is energized.
An easy way to add security to your access control system.Works With either 12vDC or 24vDC systems
DOWNLOADS
Learn More
Installation Instructions -
HES 9600 Surface Mounted Rim Device Electric Strike
$335.00The surface mounted, windstorm rated solution
The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.
ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous dutyDOWNLOADS
Learn More
Data Sheet
Installation Instructions