Search results for 'handles 10" on center'

Heavy Duty Power Transfer Device
Concealed Mortise Mount
UL Listed Miscellaneous Fire Door Accessory
UL 10C Positive Pressure Compliant
UBC 7-2 Fire Test for Door Assemblies Compliant.

Chrome Finish Only.

DOWNLOADS
Data Sheet

These protective posts are designed to create a defensive barrier that allows for interactions while easing the concerns of your employees and customers.
The ideal solution to protect your staff and customers from the rapid spread of airborne bacterial germs and viruses caused by sneezing and coughing.
Used to separate restaurant booths, counters, office desks, banks, retail store cashier sections, or just about anywhere you can think of.

Diameter: 1" dia. tube.
Finish: Brushed (satin) stainless steel - US32D
Height: 30" tall - Can be recut to any length. (Remove bottom mounting foot and cut with pipe cutter, then reattach foot)  
Adjustable clamps accept 1/4" or 3/8" Glass, Plexi, Lexan. (Note: Glass, Plexi, Lexan is not included)
Glazing Secured by nylon-tipped set screws.
Claps are adjustable to any angle!

Glass recommendation: We recommend setting your vertical posts in place prior to ordering from your local glass company. This will ensure proper sizing and fit.  The glass can extend past the top of the vertical tube to make it taller than 30”. You can also hold the glass up 5” for example or have the glass cut to have a “pass-through”  at the bottom. We recommend you get the glass with polished edges. Please consult a glass company for recommended maximum spans depending on glazing selected.

Note: fasteners NOT included due to varting surface mounting conditions.

If you need a WALL MOUNTED bracket for these vertical posts please click HERE

Large Format Interchangeable Mortise Cylinder For Von Duprin Cylinder Dogging Kits.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Core - Schlage 23-030c
6 Pin Temporary Core. - One Bitted Only
Solid Brass
Come with 1 Control Key and 1 Operating Key.
26D finish Only

DOWNLOADS
Key Cylinder Cut Sheet

DOWNLOADS
Cut Sheet Learn More

LCN 4110-18 PA Mounting Plate for LCN 4111 EDA Closer

DOWNLOADS
Installation Instructions

Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size door

Cut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installation

Current discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze  Anodized
- 5 @ 48" Dk. Bronze Anodized

DOWNLOADS
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions

Tubelite Bottom Pivot Set
Includes Top P795L/R Frame Portion Top P795DB Door Portion
Standard 3/16" Inset Mount Specify Left or Right Hand

DOWNLOADS
Brochure

Our standard A47 Push Bars are made of solid 1" diameter Aluminum. 
Each Push Bar has a 1 5/8" clearance on the lock side of the door which slopes down to 3/8" at the hinge side where a plastic transition block creates clearance from the door. 
Each Push Bar is fastened with a 5/16-18 cone head bolt for heavy duty long lasting application at the lock side and a 1/4-20 Button Head Cap Screw at the hinge.

36" Aroyan Door on Butt Hinges =  33 11/16" CTC
36" Aroyan Door on Continous Hinges =  33 7/16" CTC
42" Aroyan Door on Butt Hinges =  39 11/16" CTC
42" Aroyan Door on Continous Hinges =  39 7/16" CTC

Note:
P1565E & P1565G  = This will be a factory order and will take up to TWO weeks to receive.
P1565E & P1565G will be fastened with 1/4-20 cone head at lock side and 1/4 - 20 at the hinge side.
P1565E : Stock 36" Tubelite Door on Butt Hinges =  33 3/4" CTC
P1565G : Stock 42" Tubelite Door on Butt Hinges =  39 3/4" CTC

DOWNLOADS
A47 Cut Sheet
ABF15747 Cut Sheet