Search results for 'tubelite'

The P068 is a Special 1/2 Mortise - 1/2 Slotted hinge. 
This is an old "Tubelite" hinge application.

Price is per hinge each

Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors

P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard

P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard

P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)

All Products Are Currently Only Available in Grey Color

Note: All Products Are Priced PER FOOT.  (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)

Tubelite Bottom Pivot Set
Includes Top P795L/R Frame Portion Top P795DB Door Portion
Standard 3/16" Inset Mount Specify Left or Right Hand

DOWNLOADS
Brochure

Tubelite Top Pivot Set
Includes Top P795H Frame Portion Top P795DT Door Portion
Standard 3/16" Inset Mount

DOWNLOADS
Brochure

Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.

Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only

See 2nd Picture For Handing.

Typically mounted along the edge of "inactive" door stiles for pair of doors.

Offset: 1/4" / Offset: 1/8"
Flush Bolt Length: 12"
Rod Length: 11" (1/4"-20 thread rod)
Square nylon tip with Beveled Corners Fits in 1/2" (13 mm) Square or Round Strike
Bolt Throw: 5/8"
Backset: 7/8"
5/8" adjustment on rod length
Face Plate: 15/16" Wide x 4-1/4" High with 5/32" radius corner
1/4" Offset is Standard for Tubelite Doors on the edge of stile  -  10-24 thread
1/8" Offset is for the face of the stile   -  10-24 thread

Note: Guides NOT included.

Price is for Single Unit, and not a pair.

DOWNLOADS
Data Sheet

The P025A is a 3-1/4" x 4-1/2" Stainless Steel slotted hinge
Old style Tubelite hinge

Price is per hinge
2-11 hinges = $ 24.00 each
12-24 hinges = $ 21.60 each
25-36 hinges = $ 20.40 each
37 + = Please call

DOWNLOADS
P025A Cut Sheet

Our standard A47 Push Bars are made of solid 1" diameter Aluminum. 
Each Push Bar has a 1 5/8" clearance on the lock side of the door which slopes down to 3/8" at the hinge side where a plastic transition block creates clearance from the door. 
Each Push Bar is fastened with a 5/16-18 cone head bolt for heavy duty long lasting application at the lock side and a 1/4-20 Button Head Cap Screw at the hinge.

36" Aroyan Door on Butt Hinges =  33 11/16" CTC
36" Aroyan Door on Continous Hinges =  33 7/16" CTC
42" Aroyan Door on Butt Hinges =  39 11/16" CTC
42" Aroyan Door on Continous Hinges =  39 7/16" CTC

Note:
P1565E & P1565G  = This will be a factory order and will take up to TWO weeks to receive.
P1565E & P1565G will be fastened with 1/4-20 cone head at lock side and 1/4 - 20 at the hinge side.
P1565E : Stock 36" Tubelite Door on Butt Hinges =  33 3/4" CTC
P1565G : Stock 42" Tubelite Door on Butt Hinges =  39 3/4" CTC

DOWNLOADS
A47 Cut Sheet
ABF15747 Cut Sheet