Search results for 'key'

First Choice Series 3692 CVR Panic Exit Device, With Cylinder Prep, Less Key Cylinder)
Sleek and attractive, the 3692 Concealed Vertical Rod Exit Device is ANSI Grade 1 ( 500,000 cycles ) and UL listed.
With durable anodized finishes and high-performance coatings on solid metal end caps, these devices are made for tough, high traffic conditions.
The slim, compact design enables mounting on narrow stile doors up to 4 feet wide and 9 feet tall (with extended rods).
The 3692, EL3692, MEL3692 can retrofit the old Dor-0-Matic crash bar (part # 1990) and it also can replace the Dor-0-Matic 1690.

**Don't Forget About A Power Supply With Electric Latch Retraction Panic Exit Device.**

DOWNLOADS
3692 Product Literature
3692 Product Manual / Installation
3600 Series Product Template

**Aroyan Can Not Warranty an MEL Device if a First Choice Power Supply (PSEL1500/PSEL300-2/PSMEL1500-1/PSMEL2000) is not purchased with the device at the time of order**

PLEASE NOTE: some of the selections are FACTORY ORDER which consists of:
- 48" BlackStandard/Manual Device
- 48"  MEL Devices - All Finishes

Kaba Ilco 28026
6 Pin Aroyan Temporary Core.
Solid Brass
Come with 1 Control Key and 1 Operating Key.
Replaces Arrow, Best, Falcon, KSP
Painted Teal.

DOWNLOADS
Key Cylinder Cut Sheet

Not Sure Which Power Supply you need?: Power Supply Selector

1 Amp SINGLE Output - ( PSMEL1500-1 )Power Supply for MEL Motorized Latch Retraction capable of operating one (1) 1amp-24VDC panic hardware device.
• In addition, an auxiliary power output shall provide power for accessory devices such as card
readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single MEL Submittal
Single MEL Install Manual

1 Amp DUAL Output - ( PSMEL2000 ) Power Supply for MEL Motorized Latch Retraction capable of operating up to two (2) 1amp-24VDC panic hardware devices simultaneously
• Each lock output shall have an adjustable relock delay timer
• It shall control a pair of doors simultaneously or independently two doors
• Relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays shall control automatic door operators for doors that are always locked
or for doors that are unlocked during the business day
• Two un-switched auxiliary voltage outputs shall provide/remove power to the lock outputs when activated
• A programmable FACP interface shall provide power/remove power to the lock outputs when activated
• Shall have LED status indicators monitor AC, FACP status & for lock output wiring supervision
• Intelligent logic shall provide protection against accidental shorting of lock outputs.
Dual MEL Submittal
Dual MEL Install Manual

16 Amp SINGLE Output - ( PSEL1500 ) Power Supply for (solenoid) EL Electric Latch Retraction operates one (1) 16amp-24VDC panic hardware device.
• It is designed to handle the high current surge panic hardware locking devices demand.
• In addition, an auxiliary power output provides power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.
Single EL Submittal
Single EL Install Manual

16 Amp DUAL Output - ( PSEL3000-2 )DUAL Power Supply for (solenoid) EL Electric Latch Retraction will operate up to two (2) 16amp-24VDC panic hardware devices simultaneously
• It is designed to handle the high current surge panic hardware locking devices demand
• Each lock output has an adjustable relock delay timer
• It will control a pair of doors simultaneously or independently control two individual doors
• It has a follower relay for each output to trigger external relays, ADA push plate switches, etc.
• Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day
• In addition, two un-switched auxiliary volt-age outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc.
• A programmable FACP interface will either provide power or remove power to the lock outputs when activated.
• LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision.
• Intelligent logic provides protection against accidental shorting of lock outputs.
Dual EL Submittal
Dual EL Install Manual

Free Shipping On Power Supply When Purchased Along With A First Choice Panic Bar. (Lower 48 States)

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.

DOWNLOADS
Product Literature
Product Literature
Product Templates

Cylinder Cam Information

"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Large Format Interchangeable Core - Schlage 23-030c
6 Pin Temporary Core. - One Bitted Only
Solid Brass
Come with 1 Control Key and 1 Operating Key.
26D finish Only

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Rim Cylinder For Panic Devices.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
(With Tailpiece and Stamped 3/32" Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Adams Rite Locks.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.75" Body Length
(With Tailpiece and 1/4" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.

DOWNLOADS
Key Cylinder Cut Sheet

Small Format "Best" Interchangeable Cylinder For Adams Rite MS Locks and Latch Locks.
Made of Solid Brass.
1.75" Body Length
(With 002 AR Cam and 5/32" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.

DOWNLOADS
Key Cylinder Cut Sheet