Sweeps / Accessories / Misc
-
First Choice NL Night Latch Kit for 3690 CVR Panic
$24.00Night Latch Kit for 3690 CVR Panic's
Kit Includes:
#8 - 16001004 - Cylinder Bushing
#9 - 16001007 - Pinion
#10 - 16001003 - Retractor
#11 - 3 - Axle Screw
#13 - 821- Pinion Support BracketDOWNLOADS
Learn More
3692 Product Manual -
SDC BR64XL Rectifier
$20.00Used with the SDC 45 Series electric Strikes.
The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.
Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load
Learn More -
Trine BZ-12 / BZ-24 Audible Buzzer for DC power
$17.00Trine BZ-12 Audible Buzzer for 12vDC power
Trine BZ-24 Audible Buzzer for 24vDC powerDOWNLOADS
Learn More
Buzzer Size -
Drop Angle Bracket For "Standard" Closers
$15.00This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.
1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.
Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.
Available in both Clear and Dark Bronze Anodized finishes.
DOWNLOADS
Diagram TemplateExample Closers To Fit This Bracket:
- Norton 1600 Series
- Dormakaba/Stanley QDC300 Series
- LCN 1250 Series
- Falcon SC61
- Hager 5300
- International 8051-TP
-
Sweep w/ Rain Drip
$14.00Door sweeps are surface applied to the face of a door.
They are commonly used on the exterior of out swing doors.
Sweeps Screw Applied
Aluminum/Vinyl Sweep
P1275A = Sweep Length is 36"
P1276A = Sweep Length is 42"P1277A = Sweep Length is 48"
Please call if you need a BRUSH insert instead.DOWNLOADS
Learn More
Sweep Cut Sheet -
Sweep - Interior Mounted
$14.00Door sweeps are surface applied to the interior face of a door.
They are commonly used on the interior of out swing doors.
Sweeps Screw Applied
Aluminum/Vinyl Sweep
P1275 = Sweep Length is 36"
P1276 = Sweep Length is 42"DOWNLOADS
Learn More
Sweep Cut Sheet -
Adams Rite 4902 Strike Plate
$10.00Adams Rite 4902-01 - Flat For Frame Side - Includes molded black plastic dust box and steel mounting plate
Adams Rite 4902-02 - radiused strike plate, for the nose of the opposite door when latching pairs. - Includes molded black plastic dust box and steel mounting plateDOWNLOADS
Learn More
Data Sheet
Installation Template -
Kick Down Door Stop
$10.00Kick Down Door Stop Rubber bumper provides reliable grip on floor Base Length: 2" Base Width: 1 1/2" Reach: 4" Finishes: 689 - Aluminum 695 - Dark Bronze Note: No fasteners are included Learn More -
MS Face Plate
$8.00Fits With MS 1850 Series Locks.. Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only - 7 1/4" x 1 1/8" Comes With Screws. See 2nd Picture For Handing. Learn More -
Latch Lock Face Plate
$8.00Latch Lock Face Plate For Singles Or Pairs Of Doors, Comes With Screws.
Special Oversize Style Face Plates For Aroyan / Tubelite Doors Only
See 2nd Picture For Handing.
Learn More