Search results for 'p 009a'

DOWNLOADS
Cut Sheet

Door sweeps are surface applied to the face of a door.
They are commonly used on the exterior of out swing doors. 
Sweeps Screw Applied
Aluminum/Vinyl Sweep

P1275A = Sweep Length is 36"

P1276A = Sweep Length is 42"

P1277A = Sweep Length is 48"

Please call if you need a BRUSH insert instead.

DOWNLOADS
Sweep Cut Sheet

Night Latch Kit for 3690 CVR Panic's
Kit Includes:
#8 - 16001004 - Cylinder Bushing
#9 - 16001007 - Pinion
#10 - 16001003 - Retractor
#11 - 3 - Axle Screw
#13 - 821- Pinion Support Bracket

DOWNLOADS
3692 Product Manual

Wool Pile For DoorStops On Tubelite / Aroyan Doors

P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin

All Products Are Currently Only Available in Grey Color

Note: All Products Are Priced PER FOOT.  (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)

Trine BZ-12 Audible Buzzer for 12vDC power
Trine BZ-24 Audible Buzzer for 24vDC power

DOWNLOADS
Buzzer Size

Used with the SDC 45 Series electric Strikes.

The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

Adams Rite 4902-01 - Flat For Frame Side - Includes molded black plastic dust box and steel mounting plate
Adams Rite 4902-02 - radiused strike plate, for the nose of the opposite door when latching pairs. - Includes molded black plastic dust box and steel mounting plate

DOWNLOADS
Data Sheet
Installation Template

This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.

1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.

Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.

Available in both Clear and Dark Bronze Anodized finishes.

DOWNLOADS
Diagram Template

Example Closers To Fit This Bracket:

• Norton 1600 Series
• Dormakaba/Stanley QDC300 Series
• LCN 1250 Series
• Falcon SC61
• Hager 5300
• International 8051-TP

Seals gaps up to 1” (25 mm)
Lowest profile, 1 9/16” (40 mm)
Minor installation adjustability, 1/16” (2 mm)
Includes self-drilling, 1” mounting screws with combo Phillips & Hex head
Screw Applied - Cut to length - Sold at 48" Long to fit any size door

Cut to size using common tools
Enhanced vertical adjustability for hassle-free installation
Easy install screw-on end caps
Interior or exterior installation

Current discontinued "OLD" Version inventory Includes: (seen in last image)
- 1 @ 36" Clear Anodized
- 1 @ 36" Dk. Bronze  Anodized
- 5 @ 48" Dk. Bronze Anodized

DOWNLOADS
Xcluder Sweep Submittal Sheet
Xcluder Install Instructions