Search results for 'series 3790'

As one of the world’s only regenerative power door operators, Norton’s 5845 x NBP (ADA EZ) Series is certified by GreenCircle to reduce energy consumption by as much as 100 percent versus other comparable operators. Available in wireless and plug-in versions and able to fit in the tightest of spaces, the 5800 ADAEZ is simple to install and use.

If the power goes out in the building, this operator will still function.

Need This to Work With An Electric Strike, Card Reader, Fire Panel, Access Control? Grab the ADA1028W WIM Card Sold Seprately..

DOWNLOADS
Installation and Operating Instructions - Push Mount
Installation and Operating Instructions - Pull Mount
WIM Card
Installation Video
Full Catalog
Brochure
Efficiency Plug-in
Efficiency Wireless
Warranty

The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability.

Universal Non-Handed, Push & Pull Mounting, Includes Wireless Push Buttons & 18" Power Cord to Plug Directly Into a120v Outlet

Note: The operator is shipped as a PUSH unit and includes instructions to convert to pull in the field.

Norton 5740K3 Complete Kit Includes:
5700 Operator
Cover
7701-1A Push Arm Assembly
5710-1 Pull Arm Assembly
(2) ADA1019-1 Push Buttons
(2) 548 Transmitters
539 Reciever 5700PC
18" Power cord

DOWNLOADS
Installation and Operating Instructions Using Power Cord- Push & Pull Mount
Installation and Operating Instructions Hardwire- Push & Pull Mount
Push To Pull Conversion Instructions
Wiring Instructions
Catalog/Brochure
Warranty

Looking for the Touchless Norton 700 Actuators? 

Von Duprin PS914-2RS series power supply.
The only power supply for use with Von Duprin EL exit devices such as the EL99 & EL9927.
The regulated output power is field selectable for either 24VDC or 12VDC @ 4 amps.
Standard power input 120/240 VAC.
The PS914-2RS replaces the obsolete PS873-2 power supply.

DOWNLOADS
PS914 Data Sheet
Installation Instructions

REPLACEMENT BODIES ONLY

DOWNLOADS
Product Brochure

All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".

Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only

Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

Utilizing a unique gear system these levers will operate the CVR or Rim exit devices.
All levers are designed to work with most common mortise cylinders.
A security collar is included.
Available in powder coat finishes matching clear aluminum or dark bronze.

DOWNLOADS
Product Literature
Product Literature
Product Templates

Cylinder Cam Information

"M1" Night Latch = Turning key as far as it will go retracts latch. Key MUST be returned to the original position to be removed, leaving the handle locked.
"M3" Hold Back = Turning key one complete rotation unlocks the handle. If Key is removed in this position, the handle stays unlocked, allowing entry anytime. Returning the key to the original position before removing allows the handle to become locked again.
"M2" Passage = The lever is always operable and cannot be locked against entry.
"M0" Inactive = The lever acts as a pull only and is inoperable.
"E1" Electrified Operation Control Option for lever handle - Can be unlocked remotely using 24vDC low amperage (.5 amps)

All L3 Levers are Factory Ordered, 3-5 weeks lead time.

LCN 4000/4110 Series
The 4111 is LCN’s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications.

LCN 4111 EDA Parallel Arm Model

DOWNLOADS
Catalog Section
Installation Instructions
Mounting Plate Installation Instructions

See Picture #2 For Handing

EDA Mounting For Push Applications only
4110-18 Mounting plate required for where top rail is then 5 1/8", measured from the stop. Plate requires 2" minimum top rail.

The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year Warranty

The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.

FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”

**Don't Forget About A Power Supply With Electric Latch Retraction**

DOWNLOADS
MLRK1 Cut Sheet
MLRK1 Installation Manual

The 4040XP Series is LCN’s most durable surface-mounted heavy-duty closer, designed for the most demanding high-use-and-abuse applications.
It meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements.
This closer is cUL listed and UL listed for self-closing doors without hold-open and boasts a 30-year limited warranty.

LCN peel-n-stick templates assure quick and accurate installation, and the patented LCN Green Dial takes the guesswork out of spring force adjustments.

DOWNLOADS
Catalog Section
Pull Side Installation Instructions

The surface mounted, windstorm rated solution

The 9600 Series is a windstorm rated, surface mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt.
All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.
Simply place the electric strike on the surface of the frame, align it with the exit latch bolt and install.
Field selectable for fail secure and fail safe operation, and for 12 or 24VDC.

The 9600 is the only surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

ELECTRICAL
.45 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous duty

DOWNLOADS
Data Sheet
Installation Instructions