Search results for '25'
-
Ives CS115 Crash Stop / Storm Chain
$35.0025 1/2" Length - Used for 36" Door Width (other sizes available for factory order) - Specially designed for full-size exterior doors - Tear resistant, grey vinyl cover - Heavy duty compression spring assembled to both ends of chain and end brackets - Packed with sheet metal screw. - Cast brass brackets with solid, welded steel chain - 25 1⁄2" - Recommended for 36" door width (product no. CS115-25) Finishes: - 613 Oil Rubbed Bronze Brass 10B - 626 Satin Chrome Brass 26DDOWNLOADS
Learn More
Cut Sheet
Installation Template -
Drop Angle Bracket For "Standard" Closers
$15.00This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.
1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.
Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.
Available in both Clear and Dark Bronze Anodized finishes.
DOWNLOADS
Diagram TemplateExample Closers To Fit This Bracket:
- Norton 1600 Series
- Dormakaba/Stanley QDC300 Series
- LCN 1250 Series
- Falcon SC61
- Hager 5300
- International 8051-TP
-
1 1/4" Custom Offset Ladder Pulls ARM3311
$90.00ARM3311 - 1 1/4” diameter with custom center to center offset pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applicationsAvailable in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer pulls when not seen. .
The recommended minimum length is 18" overall.
The maximum length is 118" overall."Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.
Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.Any order with a non-centered mid post must be accompanied by the order form sheet available here Order Form
Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.
SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please Specify
Base: 1"
Projection: 3 1/8"
Clearance: 2 7/8"
Offset: 1 5/8"NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over 104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.
DOWNLOADS
Learn More
ARM3311 Cut Sheet -
Kaba Ilco MKC-RIM - P573 A (Standard Rim Cylinder)
$9.00MKC-RIM-KD / MKC-RIM-KA Ilco Zinc Diecast 1" (25.4 mm) Mortise Cylinder w/Schlage "C" Keyway
KD = Keyed Differently
KA = Keyed Alike
Includes Stamped Trim Ring
"AROYAN" Stamped on face
KD (1) = One Cylinder with Key
KD (2) = Two Cylinders with Keys - Keyed Differently
KA (2) = Two Cylinders with Keys - Keyed AlikeDOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Kaba Ilco R28107 (SFIC Mortised Thin Head For CD Kits)
$25.00Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.375" Body Length
(With 001 Cam and 5/32" Straight Collars)
For Von Duprin CD Kits
Two Color Options
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Kaba Ilco R28407 (SFIC Mortised Tapered for Adams Rite Locks)
$25.00Small Format "Best" Interchangeable Cylinder For Adams Rite MS Locks and Latch Locks.
Made of Solid Brass.
1.75" Body Length
(With 002 AR Cam and 5/32" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Kaba Ilco R28207 (SFIC Rim For Panic Devices)
$25.00Small Format "Best" Interchangeable Cylinder For Panic Devices.
Made of Solid Brass.
1.75" Body Length
(With Tailpiece and 1/4" Straight Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Ilco, Arrow, Best, Falcon, KSP and Keymark.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
Kaba Ilco 28026 - SFIC (Small Format IC Cores Aroyan Temporary Core)
$25.00Kaba Ilco 28026
6 Pin Aroyan Temporary Core.
Solid Brass
Come with 1 Control Key and 1 Operating Key.
Replaces Arrow, Best, Falcon, KSP
Painted Teal.DOWNLOADS
Learn More
Key Cylinder Cut Sheet -
P025A Slip In Hinge
$24.00The P025A is a 3-1/4" x 4-1/2" Stainless Steel slotted hinge
Old style Tubelite hingePrice is per hinge
2-11 hinges = $ 24.00 each
12-24 hinges = $ 21.60 each
25-36 hinges = $ 20.40 each
37 + = Please callDOWNLOADS
Learn More
P025A Cut Sheet -
Dorma RTS 88 Overhead Concealed Closer - REPLACEMENT BODIES ONLY AND 11/16" SPINDLE
$250.00REPLACEMENT BODIES ONLY
NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGEAroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.
The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.
Size 2 = Up to a 2'-6" Exterior Door or 3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI = Interior Door 5lb max opening force for ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for ADA - Available in 105 degrees only.
DOWNLOADS
Product Manual* Closer Sizes 2, 4, BFI, BFE have at least one week lead time from the factory.
Learn More
* All 1/2" Spindle models have at least one week lead time from the factory.