Search results for 'el'

Command Access PS202 Power Supply. This Will Power TWO (2) MLRK1 MEL Kit.

PS202 - 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.

DOWNLOADS
PS202 Cut Sheet
PS202 Installation Manual

The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year Warranty

The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.

FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”

**Don't Forget About A Power Supply With Electric Latch Retraction**

DOWNLOADS
MLRK1 Cut Sheet
MLRK1 Installation Manual

ARM3311 - 1 1/4” diameter with custom center to center offset pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applications

Available in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.

Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer pulls when not seen. .

The recommended minimum length is 18" overall.
The maximum length is 118" overall.

"Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.

Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.

Any order with a non-centered mid post must be accompanied by the order form sheet available here Order Form

Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)

BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.

SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please Specify
Base: 1"
Projection: 3 1/8"
Clearance: 2 7/8"
Offset: 1 5/8"

NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over  104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
ARM3311 Cut Sheet

5800 Series ADAEZ® Operator Wireless Interface Module (WIM)

Norton introduces the Wireless Interface Module, designed to interface all versions of the 5800 Series ADAEZ Low Energy Operator (PRO, PRO PLUS, COMPLETE) with a variety of actuators and systems, including:
Wired or ADAEZ wireless push buttons
ADAEZ wireless remote
Electric lock Fire panel
Access control system
Outside push button disable contact

DOWNLOADS
WIM Card

REPLACEMENT BODIES ONLY

NOTE: Aroyan stocks 11/16" (+5mm) spindles instead of 1/2" at NO EXTRA CHARGE

Aroyan only stocks the Size 3 Body with 11/16 (extended 5mm) Spindle - All other configurations are factory order.

The RTS88 is designed to give lasting, dependable service where surface applied units and other types of closers are not suitable, or would interfere with the architectural design. It can be easily installed in wood, aluminum, or hollow metal doors and frames, for single and double-acting doors.

Size 2 = Up to a 2'-6" Exterior Door  or  3'-0" Interior Door
Size 3= Up to a 3'-0" Exterior Door or 3'-6" Interior Door 
Size 4 = Up to a 3'-6" Exterior Door or 4' Interior Door
Size BFI =  Interior Door 5lb max opening force for  ADA - Available in 105 degrees only.
Size BFE = Exterior Door 8.5lb max opening force for  ADA - Available in 105 degrees only.

DOWNLOADS
Product Manual

* Closer Sizes  2, 4, BFI, BFE have at least one week lead time from the factory.
* All 1/2" Spindle models have at least one week lead time from the factory.

REPLACEMENT BODIES ONLY

DOWNLOADS
Product Brochure

All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".

Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only

Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door

The P025A is a 3-1/4" x 4-1/2" Stainless Steel slotted hinge
Old style Tubelite hinge

Price is per hinge
2-11 hinges = $ 24.00 each
12-24 hinges = $ 21.60 each
25-36 hinges = $ 20.40 each
37 + = Please call

DOWNLOADS
P025A Cut Sheet

Corrosion resistant extruded aluminum construction, available in clear anodized, Black Anodized. zinc alloy escutcheon with a black hard coat finish. Reversible handing using cam plug.

Includes self-adhesive Push and Pull decals

Cycle testing exceeds ANSI Grade 1 standards

DOWNLOADS
Installation Instructions

An alternative to knob or lever handles. Makes opening a latched door as natural as opening an unlatched one. Just push or pull in any Adams Rite series 4500 deadlatch. Fits doors up to 1-3/4" thick.

Note: Please CAREFULLY review picture #2, so as to choose the correct door swing, before ordering.

Corrosion resistant extruded aluminum construction, available in clear anodized, Black Anodized. zinc alloy escutcheon with a black hard coat finish. Reversible handing using cam plug.

Includes self-adhesive Push and Pull decals

Cycle testing exceeds ANSI Grade 1 standards

DOWNLOADS
Data Sheet
Installation Instructions

An alternative to knob or lever handles. Makes opening a latched door as natural as opening an unlatched one. Just push or pull in any Adams Rite series 4500 deadlatch. Fits doors up to 1-3/4" thick.

Note: Please CAREFULLY review picture #2, so as to choose the correct door swing, before ordering.