Search results for 'el'

As one of the world’s only regenerative power door operators, Norton’s 5845 x NBP (ADA EZ) Series is certified by GreenCircle to reduce energy consumption by as much as 100 percent versus other comparable operators. Available in wireless and plug-in versions and able to fit in the tightest of spaces, the 5800 ADAEZ is simple to install and use.

If the power goes out in the building, this operator will still function.

Need This to Work With An Electric Strike, Card Reader, Fire Panel, Access Control? Grab the ADA1028W WIM Card Sold Seprately..

DOWNLOADS
Installation and Operating Instructions - Push Mount
Installation and Operating Instructions - Pull Mount
WIM Card
Installation Video
Full Catalog
Brochure
Efficiency Plug-in
Efficiency Wireless
Warranty

The 4040XP Series is LCN’s most durable surface-mounted heavy-duty closer, designed for the most demanding high-use-and-abuse applications.
It meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements.
This closer is cUL listed and UL listed for self-closing doors without hold-open and boasts a 30-year limited warranty.

LCN peel-n-stick templates assure quick and accurate installation, and the patented LCN Green Dial takes the guesswork out of spring force adjustments.

DOWNLOADS
Catalog Section
Pull Side Installation Instructions

The Record SimpleSwing (SS8200) low energy door operators are heavy duty (HD) for reliable operation like you have never experienced. Designed to handle a maximum door weight of 700lbs -- the SS8200 has been engineered to accomodate most types of inswinging and outswinging doors.

DOWNLOADS
Sell Sheet
Drawing
Warranty

With built-in programmable controls and interfaces for electric strikes—combined with up to a 3-year warranty—the SS8200 simply out performs the competition.

-All units are stocked as: 36" w/ Standard Arms & 35mm Spindals (Overall header width 39.5" long)
-Track Arms can be purchased separately
-For 42", 48", Or Pairs - Please call to order. - (w/ added price & leadtime)

Features

-Can be used for interior or exterior applications
-Surface Mounted
-Push or Pull Same Unit -Non-handed*
-SimpleLynk communications display allows the installer to properly set-up and program the door
-Simple to install and program
-Available for singles stocked and for pairs or double egress doors are factory orde
-Available in clear or dark bronze anodized finishes
-Push to start applications eliminate the need for additional activation accessories and complex wiring
-Latch assist function assures closing in areas with heavy stack conditions
-Interfaces with electric strikes without additional relays or delays
-Breakaway adapter to prevent operator or arm damage when abused
-Various arm options
* Handing can be changed in the field from selected handing when ordered.

Complies with the following standards. ANSI/BHMA A156.19, UL325, UL228, UL10C.

NOTE: The base unit does NOT come with activation push buttons. (Below kits can be ordered for ease, or individual items can be purchased for a custom configuartion)

Activation Push Buttions Kit Details:
No KIt: No Push Buttions, No Mounting Boxes
Kit 1: Includes 2 @ 4.5" Square BEA 10PBS451 buttions & 2 @ BEA 10BOX45SQSM Surface Mounted Boxes
Kit 2: Includes 2 @ 4.5" Square BEA 10PBS451 buttions, 2 @ BEA 10BOX45SQSM Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module 
Kit 3: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions & 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes
Kit 4: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions, 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module

DOWNLOADS
Sell Sheet
Drawing
Warranty

Norton 700 Touchless Actuator Single gang AND double gang packaged together The sensor requires movement for activation Motion Sensor 0"-4" range 0-35 Second Variable Hold Satin Stainless Steel Dimensions: 3" W x 4-3/4" H (Single), 4-1/2" W x 4-1/2" H (Double) Compatible with the following Norton operators: 5600 Series, 5700 Series (5740K3), 5800 Series (ADAEZ), 6000 Series, and 6300 Series Please Note: You Get ONE Switch and two faceplates in the box.

DOWNLOADS
INSTALLATION INSTRUCTIONS

REPLACEMENT BODIES ONLY

DOWNLOADS
Product Brochure

All floor-concealed door closers shall be DORMA BTS80 Series employing a cam and roller mechanism. The closers shall be capable of controlling interior or exterior doors weighing up to 660 pounds and measuring up to 4'-0" wide exterior and 4'-6" interior. The closers will have a selectable multipoint hold open between approximately 75º and 175º. The closers will have selectable delayed action to allow delayed closing from 175º to 75º. The closers will have a mechanical backcheck at approximately 70º. Dual valve adjustment will provide a controlled closing speed from approximately 175º opening range, even in cold temperature conditions. The closer will provide adjustment within the cement case to allow lateral and longitudinal adjustment of 1/4" and vertical height adjustment of 5/32". Field interchangeable spindles will be available to provide bottom door clearances ranging from 5/16" to 2-5/16".

Available in Ansi 3, Ansi 4, and Ansi 6 - bodies only

Ansi 3 = Up to a 3'-0" Exterior Door or 3'-6" Interior Door
Ansi 4 = Up to a 3'-6" Exterior Door or 4'-0" Interior Door
Ansi 6 = Up to a 4' Exterior Door or 4'-6" Interior Door

RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

NOTE: Available in US32D Only

FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited Warranty

DOWNLOADS
0162 Cut Sheet
0162 Installation Manual

Von Duprin EPT-2 / EPT-10 Electrical Power Transfer

EPT-2 = Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge
EPT-10 CON = TEN 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge with connectors.

DOWNLOADS
Data Sheet
Installation Instructions

1" Storefront panels consist of either embossed or smooth aluminum overlay on both sides laminated to 1/8" solid plastic on both sides with 3/4" foam sheet in the middle core to create a 1“ total thickness wall panel.  

1/4" Thick Storefront panels consist of embossed or smooth aluminum overlay on both sides laminated to an exterior grade 3/16" solid plastic core.  

Embossed & Smooth Panels are available In Full 4' x 10' sheets
(Full Sheets are pickup only) or cut sizes pieces may be shipped.
Please call to order cut size sheets.

LCN 4000/4110 Series
The 4111 is LCN’s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications.

LCN 4111 EDA Parallel Arm Model

DOWNLOADS
Catalog Section
Installation Instructions
Mounting Plate Installation Instructions

See Picture #2 For Handing

EDA Mounting For Push Applications only
4110-18 Mounting plate required for where top rail is then 5 1/8", measured from the stop. Plate requires 2" minimum top rail.