Search results for '25'

ARM3301 - 1 1/4” diameter with custom center to center straight pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applications

Available in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.

Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer Pulls when not seen.

The recommended minimum length is 18" overall.
The maximum length is 118" overall.

"Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.

Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.

Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)

BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.

SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please specify
Base: 1"
Projection: 3 1/2"
Clearance: 2 1/4"

NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over  104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
ARM3301 Cut Sheet

The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1closers are designed for exterior or interior doors. A full complement of regular and heavy-duty arms, brackets and options make the 1600 Series closers ideal for virtually any medium traffic, commercial application.

Need a Drop Angle Bracket?

Features:
One-piece, heavy duty cast aluminum body
Adjustable 1-6
Full complement of arms available as hold open or non-hold open
Maximum degree of swing is 180°, trim permitting
Tri-style® packaging: regular, top jamb or parallel mounting
Non-handed
2-7/8" projection

Benefits:
High strength aluminum alloy closer body provides for long life
Independent latch, sweep and backcheck intensity valves to ensure positive control
Broad variety of arms and applications for any environment
Quick adjust slide arm for easy installation and adjustment
Non-handed for installation on right- or left- hand swing door
Exceeds 25 million cycles
25-year limited warranty
Longer life results in fewer replacements and less material used
Covered by Norton End-of-Life Recycling Program

DOWNLOADS
Catalog
Brochure

Norton 700 Touchless Actuator Single gang AND double gang packaged together The sensor requires movement for activation Motion Sensor 0"-4" range 0-35 Second Variable Hold Satin Stainless Steel Dimensions: 3" W x 4-3/4" H (Single), 4-1/2" W x 4-1/2" H (Double) Compatible with the following Norton operators: 5600 Series, 5700 Series (5740K3), 5800 Series (ADAEZ), 6000 Series, and 6300 Series Please Note: You Get ONE Switch and two faceplates in the box.

DOWNLOADS
INSTALLATION INSTRUCTIONS

Large Format Interchangeable Rim Cylinder For Panic Devices.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
(With Tailpiece and Stamped 3/32" Collar)
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Adams Rite Locks.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

Large Format Interchangeable Mortise Cylinder For Von Duprin Cylinder Dogging Kits.
Made of Solid Brass.
1.5" Body Length with a 1.15625" Diameter
7 Pin Housing Accepts 6 or 7 Pin Cores from Schlage.

DOWNLOADS
Key Cylinder Cut Sheet

RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

NOTE: Available in US32D Only

FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited Warranty

DOWNLOADS
0162 Cut Sheet
0162 Installation Manual

The Record SimpleSwing (SS8200) low energy door operators are heavy duty (HD) for reliable operation like you have never experienced. Designed to handle a maximum door weight of 700lbs -- the SS8200 has been engineered to accomodate most types of inswinging and outswinging doors.

DOWNLOADS
Sell Sheet
Drawing
Warranty

With built-in programmable controls and interfaces for electric strikes—combined with up to a 3-year warranty—the SS8200 simply out performs the competition.

-All units are stocked as: 36" w/ Standard Arms & 35mm Spindals (Overall header width 39.5" long)
-Track Arms can be purchased separately
-For 42", 48", Or Pairs - Please call to order. - (w/ added price & leadtime)

Features

-Can be used for interior or exterior applications
-Surface Mounted
-Push or Pull Same Unit -Non-handed*
-SimpleLynk communications display allows the installer to properly set-up and program the door
-Simple to install and program
-Available for singles stocked and for pairs or double egress doors are factory orde
-Available in clear or dark bronze anodized finishes
-Push to start applications eliminate the need for additional activation accessories and complex wiring
-Latch assist function assures closing in areas with heavy stack conditions
-Interfaces with electric strikes without additional relays or delays
-Breakaway adapter to prevent operator or arm damage when abused
-Various arm options
* Handing can be changed in the field from selected handing when ordered.

Complies with the following standards. ANSI/BHMA A156.19, UL325, UL228, UL10C.

NOTE: The base unit does NOT come with activation push buttons. (Below kits can be ordered for ease, or individual items can be purchased for a custom configuartion)

Activation Push Buttions Kit Details:
No KIt: No Push Buttions, No Mounting Boxes
Kit 1: Includes 2 @ 4.5" Square BEA 10PBS451 buttions & 2 @ BEA 10BOX45SQSM Surface Mounted Boxes
Kit 2: Includes 2 @ 4.5" Square BEA 10PBS451 buttions, 2 @ BEA 10BOX45SQSM Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module 
Kit 3: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions & 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes
Kit 4: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions, 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module

DOWNLOADS
Sell Sheet
Drawing
Warranty

ARM3311 - 1 1/4” diameter with custom center to center offset pull handle.
Each pull handle is fastened with a 5/16 - 18 x 2 1/2" Heavy Duty Thru-Bolt / Button Head Cap Screws for long lasting application for Metal or Wood Doors.
All glass doors come with a decorative thru-bolt for single pull applications

Available in black aluminum or US32D-316 satin stainless (high grade stainless)
Offset posts are available in both US32D-316 satin stainless and black passivate 316 stainless.

Pulls 60" or under have metal caps (Black or Stainless) or Black/Gray plastic capped ends for longer pulls when not seen. .

The recommended minimum length is 18" overall.
The maximum length is 118" overall.

"Standard" Center To Center is Overall Length Minus 6 inches for a standard deduction.

Recommended to add a mid-post to the black aluminum pulls with an overall length of 60" or greater.
Recommended to add a mid-post to stainless pulls with an overall length of 84" or greater.

Any order with a non-centered mid post must be accompanied by the order form sheet available here Order Form

Any pull with 4 or more mid posts please contact Aroyan for pricing and ordering.
Available in single pull mount or Back to Back mounting (BTB)

BTB Pricing is double the price per pull: Example: 36"-45" pull= $ 125 per pull, then select BTB mount and add a qty of 2 pulls into the cart. This will be a price of $250 and this is ONE set of BTB pulls. If you want TWO sets you must add 4 pulls into the cart.

SPECIFICATIONS
Material Dia: 1 1/4"
CTC: Custom please Specify
Base: 1"
Projection: 3 1/8"
Clearance: 2 7/8"
Offset: 1 5/8"

NOTE: Any pull handle over 92" overall in length the shipping method/quote is NOT valid if processed through the online eCommerce sales page. Any pull handle over  104" long must be shipped LTL freight - Please call for updated accurate shipping quotes.

DOWNLOADS
ARM3311 Cut Sheet