Sweeps / Accessories / Misc
-
Schlage 679-05HM Concealed Door Position Switch
$55.00Schlage 679-05HM Concealed Door Position Switch
Door position switch is used to detect the open or closed status of an opening and then send this status to a control panel.
Designed for monitoring door positions, roof hatches, gates etc.
- For hollow metal doors and frames
- SPDT Magnetic Switch
- 0.3 Amps @ 30 VDC.
DOWNLOADS
Learn More
Cut Sheet
Installation Template -
SDC BR64XL Rectifier
$20.00Used with the SDC 45 Series electric Strikes.
The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.
Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load
Learn More -
SDC RMB Buzzer
$35.00Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.
Learn More -
Door Astragal Pile / Felt
$2.00Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors
P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard
P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard
P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Door Stop Pile / Felt P1098A
$1.00Wool Pile For DoorStops On Tubelite / Aroyan Doors
P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin
All Products Are Currently Only Available in Grey Color
Note: All Products Are Priced PER FOOT. (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)
Learn More -
Motorized Latch Retraction Kit for First Choice 3600/3700 Series Exit Device MEL / QEL
$350.00The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year WarrantyThe MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”**Don't Forget About A Power Supply With Electric Latch Retraction**
DOWNLOADS
Learn More
MLRK1 Cut Sheet
MLRK1 Installation Manual -
First Choice QC-CAB-002 Quick Connect Cables
Regular Price: $100.00
Special Price $35.00
22/12 Frame to Ceiling Connecting Cable for Motor Electric Latch Retraction 180" Length (2-8 Pin Female, 2-4 Pin Male)DOWNLOADS
Learn More
Cut Sheet -
Ives CS115 Crash Stop / Storm Chain
$35.0025 1/2" Length - Used for 36" Door Width (other sizes available for factory order) - Specially designed for full-size exterior doors - Tear resistant, grey vinyl cover - Heavy duty compression spring assembled to both ends of chain and end brackets - Packed with sheet metal screw. - Cast brass brackets with solid, welded steel chain - 25 1⁄2" - Recommended for 36" door width (product no. CS115-25) Finishes: - 613 Oil Rubbed Bronze Brass 10B - 626 Satin Chrome Brass 26DDOWNLOADS
Learn More
Cut Sheet
Installation Template -
Kick Down Door Stop
$10.00Kick Down Door Stop Rubber bumper provides reliable grip on floor Base Length: 2" Base Width: 1 1/2" Reach: 4" Finishes: 689 - Aluminum 695 - Dark Bronze Note: No fasteners are included Learn More -
Drop Angle Bracket For "Standard" Closers
$15.00This angle drops the closer by 3/4", lowering the closer just enough to clear the top of the closer knuckle if you have a soffit over the top of your frame. Reusing the previous bottom hole loctions on the header.
1" x 1" x 1/8" thick aluminum angle bracket pre-machined for standard closers that measure 9-1/16" CTC wide x 3/4" CTC tall.
Comes with two 12-24 x 1/2" screws to mount the angle to the underside of the header.
Available in both Clear and Dark Bronze Anodized finishes.
DOWNLOADS
Diagram TemplateExample Closers To Fit This Bracket:
- Norton 1600 Series
- Dormakaba/Stanley QDC300 Series
- LCN 1250 Series
- Falcon SC61
- Hager 5300
- International 8051-TP