Search results for 'strike'

Designed with round corners for aluminum jambs.
Comes packed with all adapters for either 12/16/24 VAC or VDC inputs.

7400 = Flat Face Plate - (Door Jamb Mount / Single Door Application)
7401 = Round Face Plate -(Door Stile Mount / Pair Of Doors Application)

Fail safe or fail secure functions are field selectable.- (Comes packed as fail secure)
Note: Fail safe units should only be operated with DC power.

DOWNLOADS
Data Sheet

Strike Kit for 3790 RIM Panic
Kit Includes:
#14 - 836 - Strike Mounting Screws (4)
#15 - 17001423- Strike Shim
#16 - 17001A05- Strike Assembly
#17 - 17001288- UHMD Wear Strip
Mounting Template

DOWNLOADS
3792 Product Manual

SDC’s 45 series 5/8” latchbolt electric strikes are centerline latch entry strikes designed for use with cylindrical locksets and mortise locksets without deadbolt for both metal and wood frames. 45 series strikes accept 5/8” throw latchbolts or up to 3/4” throw latchbolts with 1/8” door gap.

Designed with round corners for aluminum jambs.
12/24 VDC (+/- 10%) input.  (Please ADD the "BR64XL" - Rectifier If you have AC input)

Comes Standard with: 4 7/8" Radius Corner Clear Anodized Face Plate, Adjustable Alignment, Latch Status "LS" Monitoring, &  Keeper Deadlocked Status.

Fail safe or fail secure functions are field selectable.- (Comes packed as Fail secure)

When used with DC voltage this electric strike is silent - Please ADD the "RMB" - Buzzer to your order if you wish to have an auditable buzzing noise.

Note: Black Finish faceplate is available and as an added part (you will get BOTH clear-628 and black-335 faceplates) if you select the Black Finish at checkout.

BR64XL Rectifier = The SDC BR64XL is a bridge rectifier that converts 12 or 24 volts AC transformer to DC Output. The unit is equipped with 6" wire leads.

DOWNLOADS
Data Sheet

Used with the SDC 45 Series electric Strikes.

The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.

RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D Only

The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.

FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited Warranty

DOWNLOADS
0161 Cut Sheet
0161 Installation Manual

RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

NOTE: Available in US32D Only

FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited Warranty

DOWNLOADS
0162 Cut Sheet
0162 Installation Manual

Command Access PS202 Power Supply. This Will Power TWO (2) MLRK1 MEL Kit.

PS202 - 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.

DOWNLOADS
PS202 Cut Sheet
PS202 Installation Manual

The Record SimpleSwing (SS8200) low energy door operators are heavy duty (HD) for reliable operation like you have never experienced. Designed to handle a maximum door weight of 700lbs -- the SS8200 has been engineered to accomodate most types of inswinging and outswinging doors.

DOWNLOADS
Sell Sheet
Drawing
Warranty

With built-in programmable controls and interfaces for electric strikes—combined with up to a 3-year warranty—the SS8200 simply out performs the competition.

-All units are stocked as: 36" w/ Standard Arms & 35mm Spindals (Overall header width 39.5" long)
-Track Arms can be purchased separately
-For 42", 48", Or Pairs - Please call to order. - (w/ added price & leadtime)

Features

-Can be used for interior or exterior applications
-Surface Mounted
-Push or Pull Same Unit -Non-handed*
-SimpleLynk communications display allows the installer to properly set-up and program the door
-Simple to install and program
-Available for singles stocked and for pairs or double egress doors are factory orde
-Available in clear or dark bronze anodized finishes
-Push to start applications eliminate the need for additional activation accessories and complex wiring
-Latch assist function assures closing in areas with heavy stack conditions
-Interfaces with electric strikes without additional relays or delays
-Breakaway adapter to prevent operator or arm damage when abused
-Various arm options
* Handing can be changed in the field from selected handing when ordered.

Complies with the following standards. ANSI/BHMA A156.19, UL325, UL228, UL10C.

NOTE: The base unit does NOT come with activation push buttons. (Below kits can be ordered for ease, or individual items can be purchased for a custom configuartion)

Activation Push Buttions Kit Details:
No KIt: No Push Buttions, No Mounting Boxes
Kit 1: Includes 2 @ 4.5" Square BEA 10PBS451 buttions & 2 @ BEA 10BOX45SQSM Surface Mounted Boxes
Kit 2: Includes 2 @ 4.5" Square BEA 10PBS451 buttions, 2 @ BEA 10BOX45SQSM Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module 
Kit 3: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions & 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes
Kit 4: Includes 2 @ 1.5" x 4.5" BEA 10PBJ1 buttions, 2 @ BEA 10BOXJAMBSM  Jamb Surface Mounted Boxes,  2 @ BEA  10TD900PB 900MHz Transmitters & 1 @  BEA 10BR2-900 2-Relay Logic Module

DOWNLOADS
Sell Sheet
Drawing
Warranty