Search results for 'Slip in hinge'

Used with the SDC 45 Series electric Strikes.

The SDC BR64XL is a bridge rectifier that converts AC transformer output to DC. The unit is equipped with 6" wire leads.

Technical Specifications: Input: 12 or 24VAC Output: 12 or 24VDC 4 Amps Maximum Load

Used with the SDC 45 Series electric Strikes to make an auditable buzzing noise.

Wool Pile Running Down The Centers Of Meeting Stiles On Tubelite / Aroyan Doors

P938 = Wool Pile For Tubelite Adjustable Astragal - 1/8" Wide X 1/2" Tall ( 2 Strips Per Astragal ) - TubeliteStandard

P13D = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 7/16" Tall ( 1 Stripe Down Center ) - Aroyan Standard

P13A = Wool Pile For Tubelite / Aroyan - 3/8" Wide X 5/16" Tall ( 1 Stripe Down Center ) - Used When P13D Is Too Tight (Uncommon)

All Products Are Currently Only Available in Grey Color

Note: All Products Are Priced PER FOOT.  (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)

Wool Pile For DoorStops On Tubelite / Aroyan Doors

P1098A = 1/4" Wide X 5/16" Tall With Vinyl Fin

All Products Are Currently Only Available in Grey Color

Note: All Products Are Priced PER FOOT.  (Example: If You Add A Quantity Of 8 Into The Cart You Will Get 8 Feet)

RCI 0161 3/4" Semi-Mortise Rim Strike
The 0161 is a 3/4" semi-mortise electric strike that is designed to operate with Pullman latch rim exit devices.
"08" Is 24 VAC/DC
"05" is 12 VAC/DC
NOTE: Available in US32D Only

The stainless-steel finish creates a sleek attractive architectural appearance. The slotted horizontal holes on the faceplate allow for easy and secure mounting during installation and correct alignment with the exit device. It features a hazard-free radius design.

FEATURES
Energy: 200mA 12VAC/VDC Or 24VAC/VDC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 500,000 Cycles
Mode: Fail-Secure
Warranty: 5 Year Limited Warranty

DOWNLOADS
0161 Cut Sheet
0161 Installation Manual

RCI 0162 3/4" Rim Strike
The 0162 electric strike accommodates ½” to ¾” latch projection and is designed for use with Pullman latch rim exit devices. As a completely surface mounted strike the RCI 0162 requires no cutting of the door frame. The rugged stainless-steel strike accommodates hollow metal, aluminum and wood door frames. Its heavy-duty housing is reinforced to eliminate twisting in the case of imperfect frames. The one-piece conventional keeper promotes even load distribution for increased security in the event of an attempted forced entry.

NOTE: Available in US32D Only

FEATURES
Energy: 500mA Field-Selectable 12/24VDC & 12-24VAC (Max at 12VDC)
Strength: 1,500lbf Static 70ft-lb Dynamic
Endurance: 250,000 Cycles
Mode: Fail-Secure
Latch Monitor: Optional Latch Monitor Model Available
Fire-Rated: Optional 3-Hour Model Available
Warranty: 5 Year Limited Warranty

DOWNLOADS
0162 Cut Sheet
0162 Installation Manual

The Command Access MLRK1-FAL17 (MLRK1-FC17) is a cost-effective and straightforward way to upgrade your First Choice 3600/3700, Falcon 1690/1790 series device to motor-driven latch retraction in the field.
UL Listed + 3 Year Warranty

The MLRK1-FAL17 is a robust, straightforward field-installable motorized latch retraction kit for
Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed
custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway!
It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a
breeze.

FEATURES
Voltage range – 24VDC +/- 10%
System protection – unit shutdown when
voltage exceeds 28VDC
Standard - Average Current Peak: 900mA,
Average Current Hold: 200mA
PTS adjustment – approx. 1/4”

**Don't Forget About A Power Supply With Electric Latch Retraction**

DOWNLOADS
MLRK1 Cut Sheet
MLRK1 Installation Manual

Command Access PS202 Power Supply. This Will Power TWO (2) MLRK1 MEL Kit.

PS202 - 110-120VAC input power supplies that deliver (2) amps @ 24VDC to (2) PTC fused outputs. (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.

DOWNLOADS
PS202 Cut Sheet
PS202 Installation Manual

Adams Rite 8400 Narrow Stile Mortise Exit Device
New Old Stock - Blowout Price!
Note: NO Returns on this item. All Sales Final

Note: You can purchase additional/different faceplates from us if what we have doesn't work. (additional added cost and lead time)

A 42" device can be cut down to fit a 36" door

 Current Inventory Includes:
- 2 @ 8432-37336 =  ( RHR "LH" - 36" - Black Anodized - w/ Bevel Face Plate )
- 3 @ 8432-37342 =  ( RHR "LH" - 42" - Black Anodized - w/ Bevel Face Plate )

DOWNLOADS
8400 Cut Sheet